Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 4/11/2002 10:59:58 AM EST
Brownells has Calvery Arms and DPMS brass catchers. Any suggestions for a flat top with detachable handle.
Link Posted: 4/11/2002 6:09:36 PM EST
Check out www.3bucc.com. they carry brass catchers for fixed handle, removable handle and for flat tops. New product coning out soon which cantilevers off front slot of weaver mount.
Link Posted: 4/11/2002 6:14:17 PM EST
Link Posted: 4/11/2002 6:20:32 PM EST
Well, I don't tell this to everyone, but here goes. I made a brass catcher out of pvc pipe and a mesh laundry bag. Ugliest thing you ever saw. But, I don't have to dig around through the snow to find all my brass. It works on my AR and my bolts. It doesn't attach to anything, just sits on the table where the brass is ejected. Like I said, it's ugly but effective.
Link Posted: 4/12/2002 4:54:22 AM EST
I also made my own out of steel rod, an old football jersey and heat shrink (so the rod wouldn't scratch my receiver). Clips on to the ar upper. BTW it looks store bought.
Link Posted: 4/12/2002 6:47:49 PM EST
Did I mention it was the best PVC in the store? And the laundry bag was the best Wally world had that day? Still ugly hell though. Looks store bought from " webeuglystuffandshit"
Link Posted: 4/12/2002 7:29:58 PM EST
Plastic plumbing pipe and nylon window screening can be built any way you want it.

If you're gonna be moving around, plastic tarp or old sheets sewn together. Take some bricks or what ever to anchor it if it's windy.
Link Posted: 4/13/2002 8:26:24 AM EST
Do have any pics to post?
Link Posted: 4/13/2002 11:56:14 AM EST
yupp......!!

make one yerself, mine is an old USNavy laundry bag, held open by three spring aluminum staves i pulled from a knee brace i had, it works on a bench, standing or most any position except drive bys............

Top Top