Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 2/22/2006 3:51:51 PM EST
[Last Edit: 3/2/2006 2:30:15 PM EST by GroundFire201]
I run my ANVIS6 Mono with my Aimpoint ML2 and it gets poor NV image. I know the ML2 isnt the nightvision AP like the M2 or M3 but I tried it on the lowest setting and it seems to work. At the lowest setting I cant even see the dot unles I use NV.

Anyway, my tubes are excellent with little use and no blems. It works awesome as a mono, but when I use it in conjunction with (ICW) my ML2 the image is so much darker. I also put them lens to lens with very little space between the the optics.

Why is it so much darker? Does this happen when using the M2 or M3 Aimpoints? The field of view is also mouch more narrow. All this kind of makes it difficult to use.

Any suggestions?
Link Posted: 2/25/2006 8:20:05 PM EST
[Last Edit: 2/25/2006 8:21:28 PM EST by IPSC_GUY]
Above and beyond the lower power setting of the M2 vice the ML2 I read that the optics in the M2 has different coatings that are better for low light transmission. As such, the M2 is clearer than the ML2. I have looked through ML2s in front of NVDs and noted that a bit of light loss that was not present with the M2.

I Hope that helps,

Link Posted: 2/27/2006 11:30:06 AM EST
That helps a lot. I thought that was the reason
Link Posted: 2/28/2006 1:13:30 AM EST
Quick question for ya, is yours an AB night vision set up and which objective lens are you running on your unit?

Link Posted: 2/28/2006 7:24:18 AM EST
[Last Edit: 2/28/2006 7:26:06 AM EST by GroundFire201]
Im using the lens from my ANVIS 6
the tube and housing are the same I just added the AB Night Vision Adaptor

Link Posted: 3/2/2006 2:29:42 PM EST
Whats better for NV Mono in conjunction with red dot - AimPoint or EOTech?
Link Posted: 3/2/2006 3:55:36 PM EST
Link Posted: 3/4/2006 11:04:36 AM EST

Originally Posted By Victor:

Originally Posted By GroundFire201:
Whats better for NV Mono in conjunction with red dot - AimPoint or EOTech?

The EO wins hands down for less body housing obstruction and better FOV.

Thats what I thought
Top Top