User Panel
Posted: 8/7/2004 11:47:03 PM EDT
|
|
Now thats funny! Photoshopping has brought so many delights to our table!
|
|
|
|
Is that just not the biggest hunk of shit you have ever seen?
I can just imagine some inbred fucktard showing up at a range and thinking im the coolest kid on the block hee! hee! Look at me Mahh im a SWAT man!!! |
|
Reminds me of the days when guys would buy an SKS for $96, "pimp" it out by loading it up with $200 worth of bling-bling, then think they could get $296 for it at a gun show.
|
|
Using high grade after market products one can achieve the desired results.http://www.hunt101.com/img/156367.jpg
|
|
I'm pretty sure I saw THRUSH using those in an episode of Man from UNCLE back in 1965. Or maybe it was KAOS on Get Smart. Or maybe it was Max Smart on Get Smart. Or maybe it was on The Monkees.....
|
|
I am horrified that there are people who would actually buy that crap.
|
|
Break action at that, imagine trying to reload while prone. |
|
|
I still say it is fake. Look at the way the stock is and then notice the angle at which the gun is to the camera. Photoshopped. Someone is pulling our legs.
|
|
I agree; Still looks fake to me too. If it is real, it's a real waste of money.
|
|
|
|
It isn't a joke. What would anyone want with a dummy flash hider on a shotgun?
|
|
I think its the most awesomest, most tacticalest shotgun I have ever seen.
|
|
Without a doubt that is the stupidest damn thing I've ever seen .
If your only gun you have for social occasions is a single shot shotgun.....don't waste money pimping it out with useless shit. A nylon buttstock shell holder would be all you need & save your milk money for a more suitable shotty. Just a guess but that's more than $100 worth of crap hanging off of it. If you shop around you can find a beater Mossberg or Savage/Stevens pump for around that amount that makes much more sense for home defense. |
|
Apparently they will be making it for Mossberg, Remmington, and similar too...
Now, if they were to make a simple stock & pistolgrip adapter (w/o PG & stock), and sell it for $20 or under that would be well recieved... |
|
I found my new shotgun for 3 gun matcheshotgun.gif
|
|
Okay, more pics please What length is that bbl? Looks like some support weapon from that angle |
|
|
For under $20 dollars? Do you have any idea what it costs to even design something like that? Hell even if you went to the Chinese it would be more expensive than that made out of the cheapest plastic you could find. |
|
|
Reminds me of an MG42. Is that the look you wanted? |
|
|
Concerning the OP, I'm utterly speechless. It makes me think of a high school kid blinging out his parents Honda Civic. It was cheap to him, so why not add a little bling-bling
I'm not sure if he was going for looks or what exactly, but I've often thought of having a semi auto shotgun with a long barrel and a long extension tube set up on a bipod. It would be a nasty close quarters, high volume weapon. With long barrel/extension it should hold up to 12 rounds of buck shot. Basically set up as a tempory fixed position weapon. Dump the tube into an area, grab, and go. I think it would be wicked since at the bipod level, the legs would be most vulnerable and the targets would fall into the succeding rounds.... I haven't persued the project though since I haven't had the occasion to be in a jungle running down a path with a bunch of thugs chasing me. So I never gave it much thought and I have to ask myself, "What would Dano523 say?" ETA, the choke/brake on m1014's shotgun looks like an extra full or something like that, maybe he really hates turkeys or it's set up for sluging deer? Sly |
|
|
12 rounds of buckshot... or 18-19 1.75" LE minishells!
That's alot of power, plus with the extra velocities out of the longer barrel it would be a little closer to regular loads. (I've though about it, too.. Get an 870 or 11xx(semi's) with 30" bbl, get one of em +5 tubes, cut it, and extend it to as many rounds as I can get without getting longer than the bbl, then install an RPK style bipod onto the end of the tube. I like the idea of porting the barrel, but this gun would be choked. A reddot would be nice [but I'd get a tubeless]). Edit: with an even longer tube, one that fits a 30" bbl to length, that's even more rounds. Possibly even 20 mini-shells (hey, a couple more, and you've can play an entire game of skeet without reloading ). |
|
How are you going to get anything to run on those Mini-shells?
|
|
I believe it takes a modified feed lever. They won't cycle in my 590 and I haven't ever tried em in my 1100CM. Of course the gas system may need tweaked to run em as well. <Shrug> Sly |
|
|
tweaking the gas system to run with minishells will most likely make it beat itself apart if you use anything else....if that's all you'd want to use, go for it |
||
|
I have one of these peoples top folding stocks and shell holder. I've been happy with it so far (tought on the cheek though). If they think they can get people to buy that crap, more power to them. Personaly I'd like to see one at the range, be like seing a good comedian for free.
|
|
|
I buy my first shotgun today and decide 'hey let's see if the guys at AR-15.com have any decent info.'
Lo and behold. I almost puked. I thought I had seen some pretty bizzare s#$t at 37mm.com but this takes the cake. (Think MAC-11 mounted to 37.mm launcher.) P.S. is that a Zitta Arms with the austrian paperweight mounted to it? |
|
And the worst part is that people think that is 'hot shit on a stick!' |
||
|
WTF??????? I stand corrected. I could understand a Taser mounted like that, I could understand a "Masterkey" door breaching shorty shotgun or a 37mm or 40mm flare/tear gas/grenade/bean bag launcher but a underbarrel Glock? |
||
|
Words fail me.... Sly |
|||
|
Geez, you never saw a forward pistol grip before? |
|||
|
Your average 2nd or 3rd year ME could design 'something like that' for a weekend assignment. It's just a block of steel CNC machined to accept the threads from the telestock on the back, and the pistol-grip on the bottom, and to fit into the stock-slot on the front, with a hole in the middle of the back for the stock-mount-bolt... Or, you could do a molded version (that would be what ATI would do), similar to the pistol-grip shotgun grips, but with mounting thereads for the CARstock.. |
||
|
Nice NFA violation (short rifle) too... I don't see a 16" bbl on that Glock... |
|||
|
AFAIK, no- the barrel needs to be over 16" cause the interpretation by the ATF is you added a stock to the glock, not a pistol to the rifle. Makes sense? Didn't think so. Sly |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.