Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 9/11/2010 9:23:00 AM EST

After picking up some new Sierra bullets this morning, I was wondering if anyone had a recommended load for the Sierra 95 grain 9mm FMJ bullet. I do not have Sierra's manual available as I just have Hornady and Speer's manuals. I have Bullseye, Titegroup, and AA#5 powders available. From what I have heard, I would prefer to use AA#5. If it matters, I will be using a Springfield XDM, and my primers will be CCI, with cases being WCC 60 (Winchester Ranger NATO).

Thanks in advance,

Link Posted: 9/11/2010 2:17:29 PM EST
Sierra's latest manual lists;

Bullseye - starting load 4.3 grains @ 1150 fps. Maximum load 5.4 grains @ 1300 fps

Tite Group isn't listed but you would use a little LESS than the charges posted for Bullseye.

AA-#5 - starting load 6.5 grains @ 1100 fps. Maximum load 7.4 grains @ 1250 fps.

Sierra's accuracy load is 5.0 grains of Bullseye for 1250 fps with this 95 grain bullet.

Sierra's hunting load (max power and acceptable accuracy) is 4.8 grains of Clays for 1300 fps. That is also a maximum according to Sierra.

OAL of 1.020".

4" barrel velocities.
Link Posted: 9/11/2010 2:45:03 PM EST
Thank you very much, Border. I really appreciate it.

Link Posted: 9/11/2010 3:57:51 PM EST
I never had any luck with 95 gr in 9mm, the bullet can't be seated that deep. Use the 95's for 380ACP if you have a 380ACP
Top Top