Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 9/1/2004 7:39:38 PM EDT
Anyone know how to take this thing apart? Got a spot of rust in there and just can't get to it without taking the thing apart.
Link Posted: 9/1/2004 8:21:52 PM EDT
At the rear of the bolt is a pin. It's got "splines" on the bottom side, so drive it out from the top of the bolt down.

This will release the firing pin, the firing pin spring, and the lock.

Use a small screwdriver to pull the extractor plunger back into the bolt, and at the same time remove the extractor from the bolt.
Remove the extractor plunger and spring.
Top Top