Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 1/27/2002 10:30:30 AM EST
Does anyone know what parts and what parts can or cannot be swapped between these two pistols? Granted that both of them are the same length.

Thanks
Link Posted: 1/27/2002 12:05:47 PM EST
Everything, as long as not trying to swap w/ 80 series Colt.
Link Posted: 1/27/2002 2:29:59 PM EST

Originally Posted By SBR7_11:
Everything, as long as not trying to swap w/ 80 series Colt.



As I understand it, the 1991 series also has a firing pin safety.
Link Posted: 1/27/2002 3:19:21 PM EST
Everything.
Link Posted: 1/27/2002 6:06:12 PM EST
I'm not sure about this because I haven't tried it, but I believe you might have some trouble putting a 1911 hammer on an A1 frame - the original hammer was very long and may hit the grip safety tang on an A1.
Link Posted: 1/27/2002 6:09:46 PM EST
The 1991A1 is an 80 Series gun and has the firing pin safety parts, pin retention plate, etc.
Top Top