Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
12/6/2019 7:27:02 PM
Posted: 5/26/2008 8:03:09 AM EST
Link Posted: 5/26/2008 9:23:12 AM EST
[Last Edit: 5/26/2008 9:39:54 AM EST by oulufinn]
Unshim the scope base and shim the barrel. I used duct tape for a temporary fix, between the barrel and stock, but that's not the best way to go. This condition is called barrel "droop". It's common with heavy aftermarket barrels and stocks.

Another fix is to use a scope mounting system that attaches to the barrel, not the action, but you still want your barrel to be straight in relation to the action... The guys over on Rimfirecentral.com are very, VERY helpful.

Here's a link to their site. LINKY There's a thread near the top, right now, illustrating this very common problem. Good luck with your rifle.

Take some time and read some posts, stickies and then ask away. You will solve any and every problem you can imagine. Awesome resource, for certain.

Link to the items below at Hawktecharms.com. (6th and 7th items down on the page..) LINKY

*Rimfire Technologies Custom Modified V-Block

*Rimfire Technologies Micro-Pivot Adjustable Bedding Kit

Link Posted: 5/27/2008 4:49:43 PM EST
+1 on rimfirecentral
also i was chasing droop but i had the receiver hump. take a real straight edge and see if you have the hump at the front of the receiver
Link Posted: 6/5/2008 3:23:12 AM EST
Any progress with your rifle?
Link Posted: 6/5/2008 6:52:47 PM EST
Try glass bedding the barrel (full length) with full contact. Supports the weight of .920 barrels.
Top Top