Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 12/12/2013 5:21:44 PM EDT
Link Posted: 12/12/2013 5:32:01 PM EDT
[Last Edit: 12/12/2013 5:33:34 PM EDT by dryflash3]
Link Posted: 12/12/2013 5:37:54 PM EDT
That's slick. Go look at 650 and see if I can do the same
Link Posted: 12/12/2013 6:11:23 PM EDT
Good job.
Link Posted: 12/12/2013 6:16:02 PM EDT
Link Posted: 12/12/2013 6:21:30 PM EDT
I have 650, and use a bead of JB WELD epoxy along top of primer bin to raise the wall of the bin, then trim so it slide onto rail of press.. seems to work fine.

I have a SDB, but never permanently mounted to anything, the 45's it has loaded, the cases were were sized on RCBS single stage in bulk prior to hitting the SDB.
Link Posted: 12/12/2013 6:27:29 PM EDT
Link Posted: 12/12/2013 6:40:54 PM EDT
I don't use a strong mount, but use the same concept. I put a drilled case on both ends of a short tube, one case in the press mount, the other inside a hole drilled in the the lid of a large plastic pill bottle. The bottle hangs from the tube similar to the old blue cup, but no leakage.
Link Posted: 12/12/2013 7:25:13 PM EDT
[Last Edit: 12/12/2013 7:25:37 PM EDT by angus6]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Lakemoor:
That's slick. Go look at 650 and see if I can do the same
View Quote

You can , I copied the one thats for sale on ebay when I still had a 650
Link Posted: 12/13/2013 10:06:34 AM EDT
Link Posted: 12/14/2013 1:18:47 PM EDT

This is all I did

Top Top