Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 2/16/2006 7:43:34 AM EST
[Last Edit: 2/16/2006 7:44:40 AM EST by ops144]
i had a rail full set of rails on briefly but really didnt like all the extra weight..

so what would be the best way to mount a light w/o them??

thanks in advance :)

crap moderator could ya move this to the light forum

sorry
Link Posted: 2/16/2006 2:19:38 PM EST
anyone???
Link Posted: 2/16/2006 2:27:08 PM EST




or


but this one is much more expensive for no real added gain.
Link Posted: 2/16/2006 2:56:41 PM EST

Originally Posted By glenn_r:
webpages.charter.net/imglennr/forum_photos/11SBR.JPG

www.brownells.com/Images/Products/100000727.jpg

or

www.brownells.com/Images/Products/965000009.jpg
but this one is much more expensive for no real added gain.



+1 for the top pic

i use a GGG sling thing (there are similar front sight rails avaialbe from MI )and a G2 surefire mounted on there--compact and lightweight

everything you need, nothing you dont
Link Posted: 2/16/2006 8:25:02 PM EST

Originally Posted By ops144:
i had a rail full set of rails on briefly but really didnt like all the extra weight..

so what would be the best way to mount a light w/o them??

thanks in advance :)

crap moderator could ya move this to the light forum

sorry hr



could've just gotten a surefire M73 handguard... carbine sized, great piece of equipment.
Link Posted: 2/16/2006 8:42:20 PM EST
Duct Tape
Link Posted: 2/16/2006 10:27:10 PM EST
IT/Streamlight mount costs less than $15 usually.

It's a small black polymer piece about 2 inches long and you drill two holes through the lower heat shield in your handguards on the bottom towards the front just behind the front sight post (carbine anyway), run the screws through the mount and secure them in the backplate of mount.

It's for use with Streamlight's M3 series of lights but I imagine any light that would mount on a 3rd Gen Glock will work but I'd verify this as I am only assuming.

Scott
Link Posted: 2/17/2006 1:24:38 AM EST
Link Posted: 2/17/2006 1:49:59 AM EST
tag
Link Posted: 2/17/2006 2:47:05 AM EST
The Maryland AR 15 website had instructions on how to mount a weaver rail to your hand guards. I did this with a couple of stainless steel screws and a two-inch section of rail. It works perfectly.
MB
Link Posted: 2/17/2006 4:15:22 AM EST
[Last Edit: 2/17/2006 4:19:51 AM EST by MrMojoRising]
I'm trying this out on a new build. It's a MI long accessory rail with a Viking Tactics mount and Surefire G2. The rail+mount+light=$68. It's sturdy enough for a light by itself but I tried a VFG on with it and I wouldn't trust it to hold up to that.




You also get a shadow from the barrel at your 2 o'clock with this setup. It's not a huge problem but it is there. I don't know if the FSB mounts do the same.
Link Posted: 2/17/2006 4:31:27 AM EST
[Last Edit: 2/17/2006 6:25:16 AM EST by Bartholomew_Roberts]
Use the SOTech light buckle. It is made with nylon webbing and costs about $13.50. It is quality gear and will do the job. That and a Surefire G2 are probably the cheapest reliable weaponlight rig you can run on an AR. Other benefit is no drilling into plastic handguards and quick installation and removal...
Link Posted: 2/17/2006 4:48:06 AM EST

Originally Posted By Scotter260:
IT/Streamlight mount costs less than $15 usually.

It's a small black polymer piece about 2 inches long and you drill two holes through the lower heat shield in your handguards on the bottom towards the front just behind the front sight post (carbine anyway), run the screws through the mount and secure them in the backplate of mount.

It's for use with Streamlight's M3 series of lights but I imagine any light that would mount on a 3rd Gen Glock will work but I'd verify this as I am only assuming.

Scott


I have something similar from GGG, but it is made of metal.www.gggaz.com/products/m3illumrifle.php.


I like the fact that it is so simple and that it shares the same light as my Glock.
Top Top