Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 6/29/2003 2:26:15 PM EST
bolt carrier key bolts? i wanna make sure i get the right one.
Link Posted: 6/29/2003 2:36:32 PM EST
The spec is bolt carrier key screws are torqued to 35-40 inch pounds and restaked... [url]www.ar15.com/content/books/TM9-1005-319-23.pdf[/url] but if you're GOING to use loctite, use the red...
Link Posted: 6/29/2003 2:50:18 PM EST
[Last Edit: 6/29/2003 3:37:40 PM EST by darth_pavoris]
i was gonna loktite torque and stake. BTW what hex key do i use on the bolts?
Link Posted: 6/29/2003 4:57:49 PM EST
I would not bother with Loctite... the heat of the carrier when fired will kill the Loctite, along with the oil. Make sure key is clean-flat, same for surface of carrier, torque to spec, and stake preferably 3 places per bolt.
Link Posted: 6/30/2003 1:40:57 AM EST
The bolt carrier key screws are 1/8"...
Top Top