Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/3/2006 6:39:03 PM EST
I have a DPMS AP4 with the M4 style stock in .308. Does anyone know if a RRA two stage trigger can be installed and work reliably? The single stage trigger is hard for me to shoot accurately with. Who has the best deals on the RRA match triggers? Thanks!
Link Posted: 3/4/2006 8:05:46 AM EST
[Last Edit: 3/4/2006 8:06:09 AM EST by Big-Bore]
Yes, it will work just fine. The DPMS lower uses all but three of the AR-15 lower parts. The three items that are special to the DPMS LR lower are the front and rear take down and pivot pins and the bolt release screw (not a roll pin). All other lower parts including the receiver extension are off the shelf AR-15 items, including the fire control group. The RR NM two-stage goes right in the DPMS LR lower, at least I hope it does because DPMS said it would and I have one on order from WOA.
Link Posted: 3/4/2006 9:30:44 AM EST
I have been running a Jewel in my DPMS 308 and have had no issues with function. The hammer spring is much lighter on a Jewel trigger compared to the RRA, so if I am not having light primer hit problems the RRA definitely will not.

You can get RRA triggers from anyone but the WOA/RRA tunned trigger for $25 more ($115) is well worth it. More pull is put on the first stage and it generaly feels crisper with little over travel.
Link Posted: 3/4/2006 2:28:40 PM EST
I have also had excellent results with the Jewell 2 stage in the DPMS AR10's.
Link Posted: 3/5/2006 8:01:29 AM EST
+1 for the WOA tuned RRA trigger. Works great in the DPMS
Link Posted: 3/5/2006 8:22:34 AM EST
[Last Edit: 3/5/2006 8:25:50 AM EST by jackal2001]
nevermind I found what I was looking for.
Top Top