Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/31/2005 10:52:53 PM EST
Does anyone know the thread pitch for the flash suppressor on the AP4 .308? Does anyone know of any other ones that fit or something to protect the threads? I took mine off the other day and would like something shorter or just protect the threads and do without a flash suppressor.

Without the suppressor the gun felt like it swung better for me.

Thanks.
Link Posted: 1/1/2006 7:53:20 AM EST
[Last Edit: 1/1/2006 7:55:35 AM EST by hooks]
You can use tool dip from a hardware store-made for handles on plyers ect.., just use it carefully, or there is tool dip from J and L Industrial Supply , it requires heat to be melted first (around 300 Deg) then used. The stuff comes in blocks and you just dump it in a pot and heat it with a cover on. It has an oily film under the coating. That's key. We use it at work to protect endmills ect...
Link Posted: 1/1/2006 6:54:53 PM EST
The thread pitch is 5/8 x 24. Armalite A2 FS would fit.
Top Top