Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/25/2005 3:04:33 PM EST
Does anyone disassemble the bolt (extractor, ejector and bolt carrier key) during routine cleaning?
I thought that was only necessary for replacement or repair.
Am I right?
Link Posted: 12/25/2005 3:14:02 PM EST
extactor yes, others- no. I wouldn't mess with the key unless it was absolutely neccessary!.
Link Posted: 12/25/2005 4:22:18 PM EST
The extractor can get crusty and the little spring needs to be inspected so that is routine. I wouldn't mess with the key as you would eventualy stake it to death. I've never heard of a key going bad because it couldn't be maintained in place.
Link Posted: 12/25/2005 5:53:46 PM EST
No need to touch a key unless its loose or wont lock up right tp the gas tube,wich can sometimes be the tubes fault.A pipe cleaner with clp does nicely.
Link Posted: 12/25/2005 5:55:16 PM EST
[Last Edit: 12/25/2005 5:58:19 PM EST by HeavyMetal]
Link Posted: 12/26/2005 3:02:33 AM EST

Originally Posted By Aristotle1:
Does anyone disassemble the bolt (extractor, ejector and bolt carrier key) during routine cleaning?
I thought that was only necessary for replacement or repair.
Am I right?


The extractor should be removed for cleaning. Leave the ejector and key alone.
Link Posted: 12/26/2005 3:23:43 AM EST

Originally Posted By RED_5:
extactor yes, others- no. I wouldn't mess with the key unless it was absolutely neccessary!.



+1
Link Posted: 12/26/2005 5:13:43 AM EST

Originally Posted By M4arc:

Originally Posted By RED_5:
extactor yes, others- no. I wouldn't mess with the key unless it was absolutely neccessary!.



+1




+2
Top Top