Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 8/4/2003 11:27:54 AM EST
Any problems?
Link Posted: 8/4/2003 11:38:42 AM EST
I've had an RRA 20" upper for about six months and have put 3000 rounds through it already. Not a single problem so far.
Link Posted: 8/4/2003 11:39:31 AM EST
Link Posted: 8/4/2003 11:44:04 AM EST
I like the one I got from Legal Transfers: [img]http://photos.ar15.com/ImageGallery/Attachments/DownloadAttach.asp?iImageUnq=3499[/img] The bottom one.....M4gery
Link Posted: 8/4/2003 2:14:16 PM EST
Never had an RRA upper but I really like their lowers. Scot
Link Posted: 8/4/2003 5:53:18 PM EST
[Last Edit: 8/4/2003 5:54:40 PM EST by Tex78]
I recently bought a RockRiver flattop upper from ADCO. Swapped out my A2. (BIG mistake back when i was cheap) Installed my EOtech and #40 BUIS, and went to the range. The upper has a very dark matte finish, and everything ran like a champ. Here's the link to ADCO. It may not be what your looking for, but they have the cheapest price I have yet seen on an A3/A4 type upper with dust cover and FA installed. ($90!) $4 flat rate shipping also! Did I mention they are also an advertiser here as well? [url=http://www.adcofirearms.com/]ADCO[/url] Tex78
Link Posted: 8/4/2003 6:47:22 PM EST
My latesone from Legal Transfers... [img]http://photos.ar15.com/ImageGallery/Attachments/DownloadAttach.asp?iImageUnq=15635[/img]
Link Posted: 8/4/2003 7:06:14 PM EST
Not a single problem with either my RRA upper (mated to an Oly preban lower) or RRA lower.
Link Posted: 8/4/2003 7:40:05 PM EST
[Last Edit: 8/4/2003 7:41:55 PM EST by Arkansas_Rocketman]
I got 2 flattops complete w/ bolt and carrier (IIRC they call them an "A3") in July, they look great and the fit and finish is top quality. Only problem was that they sent them both with green handguards, but Pete (at Legal Transfers) sent replacement black handguards muy pronto. I am darned satisfied, and Pete is one helluva nice guy to do business with. [:D]
Link Posted: 8/4/2003 8:07:11 PM EST
is everything mil-spec on RRA uppers??
Link Posted: 8/4/2003 8:26:08 PM EST
Yes, as far as I know they are. I have one from Pete too, and the finish is superb. In fact its so dark black, my Bushmaster lowers look "light black". Yes, there really are different shades of black. [brick]
Link Posted: 8/5/2003 4:32:56 AM EST
Originally Posted By brewsky101: is everything mil-spec on RRA uppers??
View Quote
Based on other posts I have read at this site (I'm posting this because I haven't seem them jump in), I believe RRA uppers are MIL spec, but the RRA LOWERS tend to be on the "tight" side of the MIL spec tolerance. That MAY indicate that their uppers are on the "loose" side of tolerance. JUST A GUESS. I don't recall reading anyone post about putting "brand X" lower on an RRA upper. You can always call RRA, (309)792-5780, and ask. I've talked to Steve at RRA and he has been very helpful. RRA's tight lowers have caused some to experience difficulty putting their "other brand" uppers on a RRA lower. The problem is temporary (things "break in" and wear just a smidgen after a hundered or two rounds) and then all is well.
Top Top