Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 7/16/2003 10:35:05 AM EST
[Last Edit: 7/16/2003 10:37:32 AM EST by JOHNNY223]
Anyone have experience with the Knights Flip up front site for a rail hand guard. Pros - cons?? I plan on mounting a low power scope to a 16" A3 Bushmaster with a milled front site base. Also--any feelings about Bushmasters B.M.A.S. rail hand guards, The Knights version, and the C - more Version. The C - more is under 16 oz. Strength and the least weight is what I am interested in. Free float or standard. Barrel cooling as well. Which one of them would you guys consider and why. thanks --- John.
Link Posted: 7/19/2003 3:21:19 AM EST
Precision Reflex has a flip up fron site that is supposed to be pretty good. I havn't seen one up close, but in the pictures it looks down right scnazzy. This pic ain't great but it was all I could find on short notice. It comes from A.R.M.S. website [img]http://www.armsmounts.com/images/45M.JPG[/img]
Link Posted: 7/19/2003 4:00:56 AM EST
I have the Knights' front flip up sight (PN 99051) on a long railed handguard, and it works great. It has a very low profile when folded and seems pretty sturdy when deployed. It gives you pretty much the same sight picture as A2 tower. It's probably not as accurate on a FF tube as a barrel-mounted sight because you can pull the FF tube off axis from the barrel if you are using a sling.
Link Posted: 7/27/2003 5:22:12 AM EST
[Last Edit: 7/27/2003 5:32:31 AM EST by Furet]
This is a close up of one of the PRI sights, this ones uses two screws and require the barrel notches be cut. Some other versions use offset screws and I think require no modification of barrel. However the notches are quit easy to do with a file. It's a very nice sight. [img]http://us.f2.yahoofs.com/users/3f22d1b8_d8ce/bc/MyPics/PRI_sight.jpg?bcHL.I_AiU9VweqN[/img] Top pic is normal taper pin notches, bottom are notches cut for my version of the PRI sight: [img]http://us.f2.yahoofs.com/users/3f22d1b8_d8ce/bc/MyPics/Barrel_cuts_for_PRI_sight.jpg?bcHL.I_AEtSMnsky[/img] If your looking for insight on forends, check out the 'uppers...' forum, there is a tack with serious comparison between many top notch systems. The top selection around here has been KAC, ARMS & OLY FIRSH, the C-more is not popular and the new one on the block is POF
Top Top