Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 1/21/2006 6:18:08 AM EST
I notice that the m900 has pressure pads on each side of the grip, so how would someone mount a laser with a pressure pad. Can you remove a pad or is there a common solution to this?
Link Posted: 1/21/2006 7:55:24 AM EST
The M900 comes with metal switch covers that are applied over the switch using double-sided tape.
Link Posted: 1/21/2006 8:17:40 PM EST
When I had my OTAL and M900A mounted on the same weapon, I placed a piece of bike tube (It actually looked good) on the handle with the pressure switch for the OTAL underneath the tube and to the rear of the handle. It worked very well.
Link Posted: 1/23/2006 1:48:06 AM EST
thats wot i did, but i had the switch located on the pistol grip instead. And with a bike inner tube holding onto it.
Link Posted: 1/23/2006 5:09:22 AM EST
[Last Edit: 1/23/2006 5:11:23 AM EST by Duffy]
Very nice Harry, yours looks as heavy as mine

On the left side of the M900 you can see the metal cover mo4040's talking about.
Link Posted: 1/23/2006 5:39:38 AM EST
Link Posted: 1/23/2006 1:24:56 PM EST
great info guys, gives me a few options to do so. thanks
Link Posted: 1/23/2006 5:00:22 PM EST

Originally Posted By new-arguy:
I've seen one guy mount the tape switch to the rear of the grip. Seemed to work ok for him.

I did that with my laser and the problem that I ran into was that I wasn't able to operate the laser and the LED's at the same time. So I moved the pressure pad to the front of the grip and I can now use my thumb to operate the LED's and my forefinger to operate the laser. Also if need be I can hit the light on as well when needed.
Top Top