Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 8/12/2003 10:57:21 AM EST
pwa lower,bushmaster m-4 upper,14.5 inch with perm attached phantom,colt bolt and carrier,7 pos.colt stock,4-sided fobus handgaurds,bushnell holosight.question is,will the sight get too hot being on the hangaurd during sustained fire?
Link Posted: 8/12/2003 12:49:46 PM EST
Good question. I have the M44 on an a2 gov profile 20". I just recently shot a rapid fire session and didn't notice it getting overly hot. The barrel forward of the handguards was HOT. NOW this wasn't 10 30 rds dumps or anything. 2 pretty fast (aquire target, fire as fast as possible) and the 3rd mag was very fast. I'm very curious if your M44 will be rigid enough to hold zero on your sight. I felt mine went on VERY solidly but I didn't have the need (too lazy)to try out any optics on it, for experimentation purposes. Let us know how it does. Here's mine, I love it. [img]http://www.hunt101.com/img/049077.jpg[/img]
Link Posted: 8/12/2003 1:30:11 PM EST
[Last Edit: 8/12/2003 1:35:45 PM EST by ky-medic]
Ridge,i couldnt see your pic,my handgaurd is very-tight,no play with sight mounted.i can co-witness the open sights with it so if it loses zero,ill be able to tell.i just really want to know from someone if theres any issues with my sight getting too hot because of where its mounted.
Link Posted: 8/12/2003 1:31:38 PM EST
now i see it,nice weapon.
Link Posted: 8/12/2003 1:42:16 PM EST
Dude I would bet that over time that sight is going to wobble a wee bit - I can see that you have a detachable carry handle. Why not take it off and mount that optic forward on the rail? The "N" battery EOTechs are small enough to mount it pretty well forward, no? BTW I'm not trying to piss on your parade here!
Link Posted: 8/12/2003 1:46:15 PM EST
i guess i could do that and put a flip-sight on it,but i like the way this looks/handles and would like to use it like this.if the handgaurd starts to loosen-up i will go that route,but for now i want to try this,just dont want to burn my sight up.
Link Posted: 8/12/2003 5:52:11 PM EST
Link Posted: 8/13/2003 5:29:46 PM EST
The issue you need to worry about is whether your EOTech will hold zero attached to the handguard. Generally, unless it's a really serious rig, like Knight's stuff, the handguard attachment to the rifle itself is not rigid enough to maintain zero.
Link Posted: 8/13/2003 5:42:49 PM EST
[Last Edit: 8/13/2003 5:53:00 PM EST by TAC40]
I have a Bushnell Holo II (didn't have enough pennies for an EO Tech) mounted on my FOBUS M33. So far, have had a problem with the heat from the barrel. Haven't more than 2 mag dumps in a row, but have gone through several 100 round strings on a combat course, in the open South Carolina sun. Only problem with heat was on my hands and sweat getting in my eyes. Sight and mounting system were flawless, so far.
Top Top