Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 12/30/2003 5:24:13 PM EDT
I'm about to assemble a RRA lower and I was wondering if I can lube the parts with clp instead of grease. I dont have anything but clp so can the parts be greased later? TIA
Link Posted: 12/30/2003 5:28:36 PM EDT
I didn't lube anything prior to assembly. Everything got a nice coat of CLP when I was done though.
Link Posted: 12/30/2003 5:32:41 PM EDT
On the 2 I've done, I wiped everything down with CLP before starting. Mainly to clean off the stuff the manufacturer put on the parts. Then I used a little CLP on all parts as I assembled. Didn't have any problems once the lowers were together, so I say CLP away. Scott
Link Posted: 12/30/2003 5:40:47 PM EDT
Cool, I started on the bolt catch and I noticed it sticks a little bit, is that normal at first? I know on my bushie it moves real loose but on the rock river parts kit it stick just a bit when its released but it moves freely when you push on it.
Link Posted: 12/30/2003 5:41:35 PM EDT
My RRA is the same.
Link Posted: 12/30/2003 5:50:12 PM EDT
Does it affect they way it works or is that normal?
Link Posted: 12/30/2003 6:59:01 PM EDT
Mine works fine. I think I've just gotten used to it. It's the only RRA I own, so I'm not sure if it is normal.
Link Posted: 12/30/2003 7:05:16 PM EDT
My RRA does this as well. I have had about 1000 rounds through it, I think I may do a tear down and do a little clearance once I get that rollpin out.
Top Top