Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 10/11/2004 2:33:26 PM EST
tactical handguard w/ 4 rails for the price/quality/heat dissipitation/ and any other feature for the $$$$$$? the slip-ons are the ones i'm looking for, not the one piece (cause i dont want to disasemble most of the upper to install)

looking at the yankee hill carbine 2 piece handguard; any other (brands, handguards) that i should look at also

trying to keep the price at less than $150



thanks all
Link Posted: 10/11/2004 3:03:59 PM EST
In that price range I would look at the YHM you’ve mentioned or SF M73.
Check this tread and look at TNRonin’s review on both.
ar15.com/forums/topic.html?b=3&f=12&t=205685

Ray
Link Posted: 10/11/2004 3:17:45 PM EST
[Last Edit: 10/11/2004 3:18:58 PM EST by Edge767]


I'd recommend the YHM 4-rail handguards. Great price, very stable, and they git'r done! Of course, mine are FF, but from what I've heard, you can get the two-piece YHM's for under $100 and they're VERY similar to my setup.

(Edited to fix the picture)
Link Posted: 10/11/2004 4:40:44 PM EST
The YHM 2-pc handguard is very good. Have one myself. Great value.

Think my next one for a new build will be the Troy.
Link Posted: 10/11/2004 8:32:38 PM EST
alrighty thanks
by the way, can i install my heat shields in the 2 piece YMH?
Link Posted: 10/11/2004 9:53:41 PM EST
I don't think you'd want to... the aluminum actually has a lot more openings to help with cooling. I've not done any full-auto firing on my M4, as it's only semi, but it seems to cool better with the YHM's than the standard handguards. Could be my imagination, though...
Link Posted: 10/11/2004 10:01:49 PM EST

Originally Posted By ALPHAGHOST:
alrighty thanks
by the way, can i install my heat shields in the 2 piece YMH?



Not needed in the least.
Link Posted: 10/12/2004 1:26:41 AM EST
Im also loooking into this for my AR. I have a question though, with the four rail handguard installed on my AR can I mount a EOtech or Aimpoint right on the rail of the handguards? I have an A2 AR.

Link Posted: 10/12/2004 11:21:18 AM EST
alrighty

so, does anyone else have any other suggestions for recomended slip-on replaceable CAR handguards w/ 4-rails?

are there any other brands?
Link Posted: 10/12/2004 12:06:19 PM EST
If it's freefloated you can (as far as I understand these things... ).
Link Posted: 10/12/2004 1:03:23 PM EST
I say get the YHM 2-piece HG's They are the best deal for the money, they fit super tight and are very well made.
Link Posted: 10/12/2004 1:13:13 PM EST
Definitely YHM for the money and Magpul for the panels.
Link Posted: 10/12/2004 1:17:31 PM EST
YHM for the quality plus less money but the KAC pannels because they don't pop off rubbing against your equipment or belly. But..................Magpul for the stock.

Top Top