Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 8/21/2004 6:49:36 PM EST
What sort of problems will I have mating these two together, and how do I remedy it?

-David.
Link Posted: 8/21/2004 7:03:23 PM EST
Hi david, you just need the reverse offset pin, bushmaster sells them and you can find them at most gun shows from dealers that sell ar-15 parts.
Link Posted: 8/22/2004 3:43:27 AM EST
[Last Edit: 8/22/2004 3:46:22 AM EST by shamayim]

Originally Posted By m4tactical:
Hi david, you just need the reverse offset pin, bushmaster sells them and you can find them at most gun shows from dealers that sell ar-15 parts.



I suspect that you're thinking about the reverse situation; big hole lower and small hole upper, when you say that most dealers have them

Bushmaster does make a kit that will sleeve the upper hole to the smaller size, and that's almost the only game in town for the conversion. It's not an offset pin, which used for the more common big hole lower/small hole upper conversion. There may be one or two other units out there, but the Bushie unit is the most available one that I'm aware of.
Link Posted: 8/22/2004 4:31:44 PM EST

Originally Posted By shamayim:
I suspect that you're thinking about the reverse situation; big hole lower and small hole upper, when you say that most dealers have them

Bushmaster does make a kit that will sleeve the upper hole to the smaller size, and that's almost the only game in town for the conversion. It's not an offset pin, which used for the more common big hole lower/small hole upper conversion. There may be one or two other units out there, but the Bushie unit is the most available one that I'm aware of.



I have been in the same situation. Bushmaster does sell a kit that will do the job but it is about $15. DPMS has a kit that does the same thing and I think it was about $5. I have both but never tried the Bushmaster since the DPMS solved the problem for me. Also, DPMS has free shipping on internet orders.
Top Top