Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 9/4/2005 7:19:44 PM EDT
Greetings all,

I just removed my extractor and noticed some kind of blue plastc looking thing in the middle of the
spring????
Its out of my dpms 11.5 in sbr that I have been having extraction problems with after only about 500 rounds down the pipe...
Link Posted: 9/4/2005 7:20:35 PM EDT
[Last Edit: 9/4/2005 7:21:14 PM EDT by 0612Devil]
So do you have a question? Or are you just stating an observation?


try purchasing the d-fender or o-ring to cure your extraction woes. It seems to have helped some out on the board...
Link Posted: 9/4/2005 7:23:00 PM EDT
just wondered if that plastic was normal
Link Posted: 9/4/2005 7:24:08 PM EDT

Originally Posted By rg7620:
just wondered if that plastic was normal


Yeah that is just the spring insert.
Link Posted: 9/4/2005 7:27:34 PM EDT
I don't see any plastic in the middle of my extractor springs.

You could also try Wolff extra power extractor spring.
Link Posted: 9/4/2005 7:38:58 PM EDT
thanks guys,this issue has been going on for a few months and i still have not been able to play with my new beta c because of it
Link Posted: 9/4/2005 9:24:42 PM EDT
Link Posted: 9/4/2005 10:05:01 PM EDT
odd that they dont listen to feed back.
I will try these ideas out,I figure if i can do a 25 cent trigger
job on my glocks i can figure this out too
Link Posted: 9/4/2005 10:21:03 PM EDT
Yes.
It's a "Smurf".
They can be blue or black.
Replace your extractor spring and/or throw in a Crane O-ring.
It wouldn't hurt to replace the Ejector spring(often overlooked,
they Do break causing weak or failed ejections)
as well as the Ejector itself-Both are of minimimal cost.
Link Posted: 9/4/2005 11:58:38 PM EDT
i would try a new spring, wolf spring or a d-fender.
Link Posted: 9/5/2005 6:53:37 PM EDT
well did some polishing with a dremal, brass rod and some inprovisation of the chamber..seems like the extraction by hand is a little smoother and easier than before..will go to the range next week for more tests..i used the same stuff as i used on my glock polish job,and it looks like a mirror now..
I am still going to get some new springs from wolff just to be safe..
Has anyone used the IOR 3x25?????wondering what peoples thoughts were on it??
Top Top