Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/8/2006 6:35:11 AM EST
I just put together a riffle from a kit from del-ton and shot it for the first time over the weekend. This is my first AR so I don't know too much about them. After shooting several rounds through the gun I noticed there there were brass marks on the piece that sticks out from the lower, right behind the bolt. I don't know if this is normal or not. If anyone cal help that would be great. I don't have any pictures yet, but I will try to get some. Thanks again
Link Posted: 3/8/2006 6:41:40 AM EST
Normal. That pointy bump is a brass deflector, to keep the empties from coming straight back. The brass scuffs will clean off fairly easliy. If there are significant dents there, I might be concerned.
Link Posted: 3/9/2006 7:57:14 AM EST
stick a little circle of black electrical tape on the contact point.problem solved.
Link Posted: 3/9/2006 8:00:22 AM EST

Originally Posted By alicecooper:
stick a little circle of black electrical tape on the contact point.problem solved.



only IF your anal retentive about a few brass marks on your "pristine" rifle......

Mike

ps - most of us don't give them a second thought
Link Posted: 3/9/2006 8:13:50 AM EST

Originally Posted By mr_wilson:

Originally Posted By alicecooper:
stick a little circle of black electrical tape on the contact point.problem solved.



only IF your anal retentive about a few brass marks on your "pristine" rifle......

Mike

ps - most of us don't give them a second thought



In fact I like my brass marks on my deflector. It shows that I actually shoot my ARs and not just finger fuck admire them from afar.
Link Posted: 3/9/2006 3:20:51 PM EST

Originally Posted By dalesimpson:

Originally Posted By mr_wilson:

Originally Posted By alicecooper:
stick a little circle of black electrical tape on the contact point.problem solved.



only IF your anal retentive about a few brass marks on your "pristine" rifle......

Mike

ps - most of us don't give them a second thought



In fact I like my brass marks on my deflector. It shows that I actually shoot my ARs and not just finger fuck admire them from afar.



+1
Link Posted: 3/10/2006 9:34:18 PM EST
ok, then don't....
Link Posted: 3/11/2006 2:21:21 AM EST

there were brass marks on the piece that sticks out from the lower,

Never seen marks on any part of the lower from the brass.
Link Posted: 3/11/2006 6:06:03 AM EST

Originally Posted By j3_:

there were brass marks on the piece that sticks out from the lower,

Never seen marks on any part of the lower from the brass.



You know what he meant.
Top Top