Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 8/10/2011 8:59:08 PM EDT
will this light work mounted in the 12 o'clock position in front of the fsp?

thanks..
Link Posted: 8/10/2011 11:46:06 PM EDT
Originally Posted By zukiii:
will this light work mounted in the 12 o'clock position in front of the fsp?

thanks..


If you have the handgun version it should work as well as the TLR-1 or X300 in same configuration.
Link Posted: 8/11/2011 10:38:36 AM EDT
What is the difference between the handgun version and the long gun version?
Link Posted: 8/11/2011 10:40:39 PM EDT
[Last Edit: 8/11/2011 10:41:41 PM EDT by Yoda_USAF]
The difference is the backplate. The long gun version has a button in the rear or a lever, depending on version, to activate the light. The handgun version has the tilting switch like the X300 or TLR-1.

Long Gun version:

Link Posted: 8/12/2011 8:05:38 AM EDT
Thanks Yoda...
Link Posted: 8/12/2011 9:51:50 AM EDT
There is another "Long Gun" version with a non-pressure type selector switch. I have both variants and the primary difference is the one pictured (which is part of the SOPMOD Block II Kit) can be activated either by pressure switch, pushing the large button, or by turning the selector knob to "on". The other non-SOPMOD version (also referred to as long-gun) does not have that large button and requires the use of a pressure switch for momentary on/off.
Top Top