Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 10/12/2002 11:58:26 AM EST
Can anybody recommend a brand of inexpensive torque wrench and where I might be able to buy it. Seems like a lot of gun related repairs (ar15 included) require one that measure in in/lbs. Went to sears but they wanted $60 for the only one that measured in/lbs. It was nice, the ratchet type but given the amount of use I actually need it it was more that I hoped to pay. thanx.

GL
Link Posted: 10/12/2002 5:41:00 PM EST
Link Posted: 10/12/2002 6:07:15 PM EST
Just about any auto parts store will have an inexpensive bar-type torque wrench as well. These are actually more accurate than the slip-ratchet type.
Link Posted: 10/12/2002 6:14:07 PM EST
Hi. The bar type should be the best and least expensive. If you get the ratchet click type, remember to back it down to zero when you get finished using it. Leaving it set for long periods is rumored to be bad for that type. Good luck with whichever you choose.
MM419
Link Posted: 10/14/2002 8:04:30 PM EST
[Last Edit: 10/14/2002 8:04:55 PM EST by bill7007]
I just seen a nice cheap one at AutoZone parts stores($25)...I plan on going back and getting one.
They also had a 1 1/8 in wrench I nned for a FAL build I am doing.
Bill
Top Top