Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 11/4/2003 2:46:40 PM EST
I know ARMS says they're guaranteed to retain zero.

has anyone had any noticable problems with zero after removing and re-mounting their optics?

Link Posted: 11/4/2003 4:54:59 PM EST
The levers repeat zero better than anything I have used, because they do not tighten side to side like others that give no uniform repeat stop to how far you go before stopping. The levers pull down under spring action and are already at stop before tightening. Most all rings retain zero, repeat on off is the key like you are reffering. If the rail your attaching to is not to mil spec, then the levers do not work as well as if on a mil spec rail. Jack
Link Posted: 11/4/2003 9:35:45 PM EST
My #22m rings come on and off my SPR more than most ever would as it is often used as a display model. They'll come offand on as much as 2 or three times a day. Worst I have even been off is less than 1/4 moa but usually better every time I have tried.
Link Posted: 11/4/2003 9:43:23 PM EST
I take mine on and off w/o even thinking about it.. only problem I had was the initial install, make sure you loc-tite the screws!
Link Posted: 11/5/2003 12:54:55 AM EST
I use #22 ARMS rings and they are the best mounting I ever had and used. They are even better than the unbeleaveble expensive " Suhler Einhakmontage" I´ve got on my Drilling ( It works with 2 hooks in front and back) I take on and off my scope with the #22 mounts nearly every day whe changing to Aimpoint and never had any difficulties . It just works perfect.
Link Posted: 11/5/2003 3:04:39 PM EST
thanks guys I asked because I was a little worried about a 10x scope i'm going to mount. I didn't want to have to re-zero every week. I geuss I'll go ahead with the #22's then, since new-arguy frequently removes and re-mounts his SPR optic with out a hitch.
Link Posted: 11/5/2003 5:22:14 PM EST
Don't forget that the levers require a mil spec rail if they are going to work like they can. If you are going to use a 10 x, then the #36 OSR would be the best combo rail using 22 med. rings. Good shootin, Jack
Link Posted: 11/5/2003 6:38:24 PM EST
[Last Edit: 11/5/2003 6:39:33 PM EST by brewsky101]
the rings will be going on (and coming off... and going on... [X] etc.) an S.I.R. so hopefuly I won't have to worry about out of spec rails.
Link Posted: 11/5/2003 6:41:37 PM EST
hey Theo, congratulations on becoming a member of my favorite web site!!
Top Top