Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 8/21/2005 1:43:31 PM EDT
my title sums it up. Picked up a very early production SP1 (late 60s), and the outside on the barrel has a fine layer of rust and rust inside the holes of the flashider. Want to know if there is a solution that will help remove it and if it can be removed with out buffing off the parkerized finish.

Link Posted: 8/21/2005 1:45:58 PM EDT
CLP, bronze brush, and elbow grease...
Link Posted: 8/21/2005 1:47:20 PM EDT
[Last Edit: 8/21/2005 1:47:39 PM EDT by MauserMark]

Originally Posted By Nate1:
CLP, bronze brush, and elbow grease...

thanks, I've done this with my C&Rs but it always removes the bluing

also, I have some 000 steel wool would that be better or worse?
Link Posted: 8/21/2005 5:54:29 PM EDT
A bronze brush should not hurt the finish on your AR.
Steel is a different story all together...
Link Posted: 8/21/2005 6:34:27 PM EDT
Sheath seems to work well for me.
Link Posted: 8/21/2005 7:48:41 PM EDT

CLP (Beretta's version) with a wire brush worked well.

Top Top