Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 8/25/2005 12:37:41 PM EDT
minor ones.........in some 855pd ammo i just got....
iam new to ar,s so please bare with me..
i read through the ammo stickys first but couldnt find much...
thanks in advance
Link Posted: 8/25/2005 2:43:55 PM EDT
No problem, It's the norm for PD ammo. Any big dents or creases I don't shoot. The last I purchased had very few dents or any other flaws for that matter. (2K of 855PD)
Link Posted: 8/25/2005 3:02:25 PM EDT
[Last Edit: 8/25/2005 3:05:01 PM EDT by Reload_em]
Check the PDs around the necks, cracks are bad. Creases are bad also

The small dents will just blow out to normal when you fire them.

Link Posted: 8/25/2005 4:17:42 PM EDT
Hey, Ops! As long as the dents are not on the gage data point line on the taper, just below the neck, shoot them.

If the dings are on this taper, you may have a problem seating the round.

As for dings on the body of the cartridge, hell, that 55,000 psi "irons" them out real quick to match your chamber!
Link Posted: 8/25/2005 4:40:35 PM EDT
all right cool guys i just save about 30 rnds i put to the side...

thanks for the help !!!!
Link Posted: 8/25/2005 9:21:25 PM EDT
Don't worry about the dents. Issued GI M855 right off the stripper clips have dents here and there.
Top Top