Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 8/25/2004 1:00:08 PM EDT
After returning from the range and firing about 100rds my RRA 2 stage trigger pins started to walk out, the hammer pin only moved a little, but the second trigger pin almost came out of its hole on the right side of the firearm, the trigger apears to be installed correctly although it and the lower are used

any suggestion?

thanks in advanced

Link Posted: 8/25/2004 1:34:13 PM EDT
Did you use the oversized pins that should have come with the trigger? If not, you should pop the regular sized pins and install the oversized pins meant to be used with it.
Link Posted: 8/25/2004 2:38:28 PM EDT
They have anti-walk pins. I have seen 2 differant types, 1. has c clips that snap around a special pin 2. strap that connects the trigger pin and the hammer pin on each side of the receiver.
Top Top