Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/23/2005 6:47:04 AM EST
i need to remove the heatsheild from my handgaurd. Is there any special tricks or tools to use to get it off easily and without daminging the handgaurd.

Thanks for your advice,
Link Posted: 12/23/2005 7:06:08 AM EST
if im not mistaken the heatshields have holes through them which plastic pegs run through and the tips are melted to hold the heatshields in place.
Link Posted: 12/23/2005 7:17:11 AM EST
Most heat sheilds are just held in place with their tabs and they will pull out easily. Some older/specialty handguards will be more problematic. For example the triangular M16A1 handguards, M4 double sheilded handguards, and the M33 Fobus handguards.
Link Posted: 12/23/2005 7:37:35 AM EST
[Last Edit: 12/23/2005 7:40:56 AM EST by Big-FED]
The ones on an RRA mid-length are held in place by notches on the posts on the handguard. They use the spring action of the shield to hold them in place. NBFD to just just gently pinch them and lift out (if they ar an RRA).
Link Posted: 12/23/2005 7:42:29 AM EST
well i have a surefire m500ab and i want to install a GG&G UFIR on the bottom half of the handgaurd at the 6 o'colck pos. Any comments or suggestions?
Link Posted: 12/23/2005 8:59:11 AM EST
Yes don't use a UFIR to support a VFG. Sell the 500 and get a rail system (even the YHM) and a M900 series light if you want to use a VFG.
Link Posted: 12/23/2005 9:25:01 AM EST
im not putting a vert grip. im using the rail to mount a L72 laser module in a universal housing.
Link Posted: 12/23/2005 9:41:04 AM EST
Does the rifle have a bayonet lug by any chance?

Mounting a laser (or any aiming device) to a non-free float handguard isn't the best and using a UFIR on a plastic rail is even worse.

There is a rail moun that attaches using the bayone lug, or you could use one of the rails that attach to the front sight base.
Link Posted: 12/23/2005 1:12:08 PM EST
cant fit a FSB mount cause of the M500 and no bayo lug
Link Posted: 12/23/2005 1:17:35 PM EST
whats the difference if i would mount the laser to the UFIR or to a regular railed handgaurd such as a ris, or M73? not all forends are FF right? Wouldnt it be the same thing?
Top Top