Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 10/7/2005 4:24:50 PM EDT
Which gas block should I use for my SAM-R build?
Link Posted: 10/7/2005 4:29:39 PM EDT
[Last Edit: 10/7/2005 4:38:04 PM EDT by olds442tyguy]
I myself would go with Larue.

ETA: I shouldn't really make a reccomendation seeing as you didn't state whether you will be using a sight or  just a plain gas block. If you want a built in sight, I'd go with PRI. If you aren't going to use a front sight or you are covering the block, go with the Larue.
Link Posted: 10/7/2005 4:30:43 PM EDT
One like this if you can find it...

Link Posted: 10/7/2005 4:53:49 PM EDT
Link Posted: 10/7/2005 4:57:23 PM EDT
[Last Edit: 10/7/2005 4:58:48 PM EDT by cgv69]
I think the GG&G setup is almost as nice as the KAC...

Unfortunately its almost just as hard to find

A lot of people use the YHM...

It's not as nice but it is a lot easier to find, afford and install. I'm not crazy about the screw clamp install but most people who have done it say it's fine.
Link Posted: 10/7/2005 5:05:47 PM EDT
[Last Edit: 10/7/2005 5:06:33 PM EDT by bigbore]
Link Posted: 10/7/2005 5:14:50 PM EDT
Thanks for the replies guys and yes I was looking for ideas of the gas block with the flip up sight.
Link Posted: 10/7/2005 7:35:25 PM EDT
[Last Edit: 10/8/2005 5:16:55 AM EDT by tankdriver]
What I finially found worked best for me was a 4 rail block like this

and a GG&G flip-up sight.

Works for me....

I have a grren laser on the bottom rail, a M3 Streamlight on the left rail, where I can use my thumb to turn it on and off. I tried handguards with rails, but did not like the way they felt, even with the covers. I like this set up the best of all that I have tried. This has worked really well for me.
Link Posted: 10/8/2005 6:03:12 AM EDT

Originally Posted By altav:

Originally Posted By Spooky130:
One like this if you can find it...




You're just cruel...

I figured you'd get a kick out of it...

Link Posted: 10/8/2005 6:04:46 AM EDT
Damn you, let's see if Mongo can just make one that looks like the KAC sight
Top Top