Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 5/23/2003 1:18:50 PM EST
I am mounting a scope on my A3. I was wondering how the 2 piece Bushmaster risers compare to the standard one piece? And generally how high of rings do you put on the risers? Low/med/high? Thanks!!!!!!!!!
Link Posted: 5/24/2003 6:34:59 AM EST
I'm using low rings on my rifle with a riser...it's just the cheap $15 Tapco one piece, but I'll assume it's the same height or very close to it. Also, I'm using a set of high rings by themselves on one of my flat tops...assuming you're not trying to mount a scope with a 56mm objective, you should be okay with just the high rings, if you want to do it that way. Here's some pics: [img]http://img.villagephotos.com/p/2003-5/188491/AR1_1.jpg[/img] and [img]http://img.villagephotos.com/p/2003-5/188491/AR15_3_1.jpg[/img] Both setups give me a good, repeatable cheek weld at just the right height...of course, my face may not be normal [;)]. Both of these scopes have about a 44mm objective, for reference.
Top Top