Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 8/30/2005 3:41:15 AM EDT
are their two types of handles one for the 14.5 inch and one for the 20 inch or are they one handle fits most , i want to get one for my a4 clone so i can use it once in a while to shoot matches
Link Posted: 8/30/2005 3:49:34 AM EDT
NO, one DCH will fit either as the flat-top dimensions/specifications are the same for any AR15/M16.

There is however a Tactical DCH made by Rock River Arms which I suggest ya avoid and they do make DCHs for AR10s made by Armalite, DPMS and Bushmaster, (which won't work on the AR15/M16 rifles).

Mike
Link Posted: 8/30/2005 4:36:31 AM EDT
same
Link Posted: 8/30/2005 4:44:09 AM EDT

There is however a Tactical DCH made by Rock River Arms which I suggest ya avoid


Just out of curiousity, why avoid?
Link Posted: 8/30/2005 4:45:26 AM EDT
Link Posted: 8/30/2005 5:08:37 AM EDT
[Last Edit: 8/30/2005 5:11:27 AM EDT by mr_wilson]

Originally Posted By xanth:

There is however a Tactical DCH made by Rock River Arms which I suggest ya avoid


Just out of curiousity, why avoid?



Most have found the RRA version to be less than ideal. Mounting of an Aimpoint requires the "X" mount in order to co-witness atop the "tactical DCH" and lack of the typical carry handle mounting of scopes and re-dots to the "missing" hole are among the few drawbacks to this item.

Mike

ps - differences can be viewed here: www.rockriverarms.com/item-detail.cfm?ID=AR0052CASY&storeid=1&image=chndls.gif&CFID=2454888&CFTOKEN=11115190
Link Posted: 8/30/2005 3:09:03 PM EDT
hey i was curious about the elevation markings in meters matching upsay an m4 vs an m16a4 that is all, i allready have a different front sight post to compensate just was curious if the rear sight was different i know on the detachable carrying handle the elevation is now 1/2 minute instead of a full minute like the a2
Link Posted: 8/30/2005 3:14:35 PM EDT
[Last Edit: 8/30/2005 3:20:58 PM EDT by Minuteman419]
IIRC, the dial for the carbean is marked 3-600 meters and the 20" is 3-800 meters.

Prolly a difference in the threads too.

I could be wrong, have been before, will be again.

Danny
Link Posted: 8/30/2005 4:14:53 PM EDT

Originally Posted By Minuteman419:
IIRC, the dial for the carbean is marked 3-600 meters and the 20" is 3-800 meters.

Prolly a difference in the threads too.

I could be wrong, have been before, will be again.

Danny



I think that they are both 600 meter sights.
But I am an A2 guy, so I too may be mistaken.
Top Top