Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 11/1/2009 9:58:08 AM EST
I have a new build that is trying to pull the rim of the cartridge off when ejected. Can anyone give me any guidance to what is happening? This certain barrel seems to scar the bullet when chambered.
Link Posted: 11/1/2009 3:21:02 PM EST
Some thoughts:

Possible tight chamber

Might be unlocking too early. Try a heavier buffer.
Link Posted: 11/1/2009 8:27:29 PM EST
Link Posted: 11/1/2009 8:34:40 PM EST
[Last Edit: 11/1/2009 8:34:53 PM EST by Dano523]
Link Posted: 11/2/2009 12:45:11 AM EST
You are correct I was using a solvent breaking the barrel in per manufacturer. Cleaned chamber area and had some improvement. Removed the o ring from extractor at the same time and do not know which has made the improvement. Still marks rim of cartridge but not as bad. Have a buffer that came with the RR lower. What buffer should I try?
Top Top