Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 7/16/2003 1:09:42 PM EST
can anyone tell me what the different hammers are...I never noticed this before my new build has the rounded one ,the bushy has the notched one...bolt carrier feels like it is snagging a little on the rounded hammer....
Link Posted: 7/17/2003 1:14:33 AM EST
[Last Edit: 7/17/2003 1:17:35 AM EST by Tweak]
The notched ones are the Colt [b]design[/b] and are meant to be used with the open bottom bolt carriers. If the hammer slips (or tries to follow the carrier closed) the hammer is supposed to catch the underside of the firing pin spool and lock the gun up instead of allowing full auto fire. The rounded (neutured M16) hammers can also catch the firing pin spool if the firing pin spool is too large (M16 firing pin) or if the hammer sits up too high (mislocated H/T pin holes, short trigger, bad hammer cut). I always recommend shrouded bolt carriers for the most reliability. If your hammer is catching the FP then you'll see it it as a bent FP retaining pin. Does the following sound right? When you work the action (with the charging handle) with the trigger forward the carrier drags. When you hold the trigger to the rear and work the action the carrier does not drag. [edited for "sound right?"]
Link Posted: 7/17/2003 1:49:07 AM EST
yes, the carrier drags going both ways.. the bolt carrier will actualy stop in forward motion with buffer spring pressure on it....?this does not happen on the bushy lower...probably be best to just swap out the hammer...
Link Posted: 7/17/2003 9:43:42 AM EST
Compare the diameters of the firing pin spools first.
Link Posted: 7/17/2003 2:42:01 PM EST
[Last Edit: 7/17/2003 2:43:55 PM EST by Dano523]
[url]http://www.biggerhammer.net/ar15/hammers/[/url] Go here and all your questions will be answered.
Top Top