Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
4/22/2019 5:32:20 PM
Posted: 1/21/2013 4:19:46 PM EDT
[Last Edit: 1/21/2013 4:29:29 PM EDT by SgtMeathead]
Link Posted: 1/21/2013 4:30:46 PM EDT
I'm not familiar with the manufacturer, but the rifle looks like an ideal setup. MOE middy handguards (with a QD socket already installed) and a lightweight barrel. I like it a lot.
Link Posted: 1/21/2013 4:33:59 PM EDT
They have been around for a bit. Starting to get alot of attention.
The rifle has been very accurate and reliable thus far.
Only bout 500 rounds through it.
During the 2013 black guns buyers guide, they ran an article on em.
Link Posted: 1/21/2013 4:35:00 PM EDT
They have been around for a bit. Starting to get alot of attention.
The rifle has been very accurate and reliable thus far.
Only bout 500 rounds through it.
During the 2013 black guns buyers guide, they ran an article on em.
Link Posted: 1/21/2013 5:05:36 PM EDT
Make sure you inspect every bit of the machining. Had one that kept destroying gas rings where a piece of tooling broke off inside the bolt carrier and left a huge chunk not machined out. Contacted Keith directly multiple times about warranty and was basically said "my rifles are the best ar-15's on the market and there is no way a machining problem is possible" without wanting to even look at what could be the problem or replace the $.05 gas rings as a nice gesture, I can't imagine the fuss he would make if I asked for a new bolt carrier. So much for a great warranty. Wish I could say good things about him being local and all, but I will never own another one of his guns again.
Link Posted: 1/21/2013 5:44:05 PM EDT
That is honestly the first bad thing i had ever heard from anyone.
And i do believe they are the best on the market. With that said things to happen and if what Ur saying is true...thats bad business.
If something went wrong i would take it back to the shop where i bought it. They have a fairly good relationship with accurate.
Link Posted: 1/21/2013 5:50:56 PM EDT
It was a shop gun with between 2-300 round through it. Besides that the upper and lower fit and finish is great, its just the internals and other small parts I have concerns with.
Link Posted: 1/21/2013 5:55:03 PM EDT
Originally Posted By SgtMeathead:
That is honestly the first bad thing i had ever heard from anyone.
And i do believe they are the best on the market. With that said things to happen and if what Ur saying is true...thats bad business.
If something went wrong i would take it back to the shop where i bought it. They have a fairly good relationship with accurate.


Why do you believe they are the best on the market? Just curious.
Link Posted: 1/21/2013 6:15:36 PM EDT
Originally Posted By beaverpelt:
Originally Posted By SgtMeathead:
That is honestly the first bad thing i had ever heard from anyone.
And i do believe they are the best on the market. With that said things to happen and if what Ur saying is true...thats bad business.
If something went wrong i would take it back to the shop where i bought it. They have a fairly good relationship with accurate.


Why do you believe they are the best on the market? Just curious.


Which market?
Link Posted: 1/21/2013 6:18:00 PM EDT
I have done metal fab and machine work for along time. The attention to detail on this rifle is above and beyond what Ive seen in its price range.
So maybe i should rephrase that. Best on the market below 2k.
Also the accuracy i have seen from the rifle. Im not a 3gun champ by any means. Far from it.
So for me to have a group a lil over 2 moa open sighted.....that speaks for the rifle also. This was done prone resting on the mag.
My windham with an eotech and a 6x Magnifier grouped right at 1 moa with hornadys.
Weight empty was 7.1 lbs. As the barrel heated accuracy did not fall off.
Link Posted: 1/21/2013 6:21:17 PM EDT
[Last Edit: 1/21/2013 6:21:48 PM EDT by Medicfrost]
Originally Posted By SgtMeathead:
I have done metal fab and machine work for along time. The attention to detail on this rifle is above and beyond what Ive seen in its price range.
So maybe i should rephrase that. Best on the market below 2k.
Also the accuracy i have seen from the rifle. Im not a 3gun champ by any means. Far from it.
So for me to have a group a lil over 2 moa open sighted.....that speaks for the rifle also. This was done prone resting on the mag.
My windham with an eotech and a 6x Magnifier grouped right at 1 moa with hornadys.
Weight empty was 7.1 lbs. As the barrel heated accuracy did not fall off.


So you've owned how many different ARs under $2000? Do you work for them?
Link Posted: 1/21/2013 6:21:37 PM EDT
With that said i won't get into an online pissing match.
Honestly could care less. I was excited about the rifle. Lol
Especially since i was able to Nab it for msrp in this day and time.
Link Posted: 1/21/2013 6:24:19 PM EDT
Originally Posted By Medicfrost:
Originally Posted By SgtMeathead:
I have done metal fab and machine work for along time. The attention to detail on this rifle is above and beyond what Ive seen in its price range.
So maybe i should rephrase that. Best on the market below 2k.
Also the accuracy i have seen from the rifle. Im not a 3gun champ by any means. Far from it.
So for me to have a group a lil over 2 moa open sighted.....that speaks for the rifle also. This was done prone resting on the mag.
My windham with an eotech and a 6x Magnifier grouped right at 1 moa with hornadys.
Weight empty was 7.1 lbs. As the barrel heated accuracy did not fall off.


So you've owned how many different ARs under $2000? Do you work for them?


I have owned and operated several ar's. Several.....and no i do not work for them.
I work for the DOCnow, unforntually
Link Posted: 1/21/2013 7:02:26 PM EDT
[Last Edit: 1/21/2013 7:04:28 PM EDT by beaverpelt]
Originally Posted By Medicfrost:
Originally Posted By beaverpelt:
Originally Posted By SgtMeathead:
That is honestly the first bad thing i had ever heard from anyone.
And i do believe they are the best on the market. With that said things to happen and if what Ur saying is true...thats bad business.
If something went wrong i would take it back to the shop where i bought it. They have a fairly good relationship with accurate.


Why do you believe they are the best on the market? Just curious.


Which market?


What do you mean which market?
Top Top