Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
Member Login

Site Notices
Posted: 3/17/2005 6:35:38 AM EST
Does anyone know where I can pruchase A1 FSB for .625 barrels?  I am not looking for the PRI or YH.  I want the original A1 FSB.  Thanks.
Link Posted: 3/17/2005 6:35:56 PM EST
If you do find one, can you put it on a turned down HBAR or do you have a bare A1 barrel lying around.  If your A1 is already drilled for the taper pins, i dont know if you are guaranteed to be able to put another FSB on and the pins line up.  Others at this forum will know more about this than me though.
Link Posted: 3/17/2005 10:59:10 PM EST
You might want to try calling YHM directly - Toll Free: 877-892-6533. I think that they will make one for you if you ask for it.
Link Posted: 3/17/2005 11:10:51 PM EST
Link Posted: 3/18/2005 4:23:27 AM EST
Thanks for the info guys.  I had already called YHM and they don't do light barrel FSB.  He said that they are not going to continue even with the standard A2 for .750 barrels either.

I will be drilling and tapping the FSB so I am not worried about it lining up with original taper pin holes.

I don't have a light barrel laying around but I have had several customers request drilled and tapped FSB for a light barrel and had not had much luck finding them.  

Extracheeze, thanks for the link as this is the first one I have seen.  A little pricy though as that is more than double what I am paying for the A2 FSB's.  

Thanks again,
Brian
Top Top