Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 11/30/2002 7:18:25 PM EST
[Last Edit: 12/6/2002 3:32:12 PM EST by PowershipMC]
What is the best method for Zeroing an Aimpoint ML2? At what range should I start, etc....?

Link Posted: 11/30/2002 8:27:06 PM EST
50 yards assuming its mounted on a flattop or using a gooseneck type mount.
Link Posted: 11/30/2002 8:43:57 PM EST
It is flat top mounted with a GG&G cantilever mount.
Link Posted: 11/30/2002 10:46:58 PM EST
I would zero it like any other rifle scopes. Adjust the windage at 25 yards. Adjust elevation at whatever distance you plan on shooting.
Link Posted: 12/1/2002 5:34:32 AM EST
Improved Battlesight Zero (IBSZ) will work just as well with the dot as with the irons. Essentially a 50 yard zero which will keep the bullet within 2" of line of sight to 220 meters. The bullet remains inside the dot out top that range. See the Maryland AR15 Shooters site for instructions, I was unable to create a link. If you have your rear sight mounted, just move the dot to the tip of the front sight to get started. -- Chuck
Link Posted: 12/1/2002 10:20:26 AM EST
And yes, you will need a good spotting scope.
Link Posted: 12/2/2002 6:47:08 AM EST
Just about any scope or binos can see these bullets at 50 yards, the zeroing range. Easy to walk down range too. -- Chuck
Link Posted: 12/2/2002 6:53:49 AM EST
[url]http://groups.msn.com/TheMarylandAR15ShootersSite/zeroingmethods.msnw[/url] Mike
Link Posted: 12/2/2002 4:27:27 PM EST
Thanks for the replies. I will try it at the range this weekend.
Top Top