Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 9/8/2004 8:27:07 AM EST
I have a RRA R-4 and the sight is a removable carry handle. I have sighted it in and the windage is nearly all the way left. What could be the cause/solution?
Link Posted: 9/8/2004 10:19:03 AM EST
One possibility is improper assembly. The barrel pin may not be correctly indexed in the slot in the upper receiver.

Go to the Troubleshooting Forum and read the FAQ's. You'll find an explanation there.
Link Posted: 9/8/2004 11:36:01 AM EST
Barrel may ned to be re-indexed. Contact manufacturer.
Link Posted: 9/9/2004 1:22:57 PM EST
Front sight isn't set up correctly?
Link Posted: 9/9/2004 4:21:26 PM EST

Originally Posted By Daytona955i:
Front sight isn't set up correctly?



The front sight post/barrel are usually considered one piece. The problem of indexing is usually because of improperly torqued barrels causing the barrel pin to be off.

When this problem was happeneing to Bushmaster, they ewre saying that anything less than 13 clicks was acceptable, anything more should be sent back to be retorqued.
Top Top