Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 12/24/2005 10:46:32 AM EDT
Will This . A ops flash hider fit on this a model1sales.com varmit kit. It says i can have it threaded should I do that? I choose that flash hider because it is the only one that is stainless that I can find.
Link Posted: 12/24/2005 11:01:56 AM EDT
Yeah, that muzzlebrake is available in 1/2" X 28 threads and the standard thread size for a 5.56 AR-15 barrel is also 1/2" X 28.
Link Posted: 12/24/2005 11:05:53 AM EDT
yes as long as the bbl. is threaded the same as the ops inc brake.

the bull bbl. is .960 dia. and ar's usually have a 1/2x28 tpi. and the only brake offered with that threading is .866" so the brake will be smaller in dia. than the bbl.

they do offer a larger dia. brake but the threading is different but that wouldnt matter if you are content with the brake.


i would recommend adcofirearms.com for the threading service, should probably send it all to them to have everything fitted correctly.
Link Posted: 12/25/2005 1:54:29 AM EDT
Link Posted: 12/25/2005 3:22:46 PM EDT
thanks for the info.
Link Posted: 12/25/2005 8:46:29 PM EDT

Originally Posted By 13thWarrior:
Will This . A ops flash hider fit on this a model1sales.com varmit kit. It says i can have it threaded should I do that? I choose that flash hider because it is the only one that is stainless that I can find.



If your going with a Bull barrel, don't thread the barrel or put anything on the muzzle. The added weight of the barrel will tame the rifle way down (read you will be able to watch the impact of the round on the target), and adding anything to the muzzle just makes cleaning/keeping the crown clean a major PITA.
Top Top