Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 9/2/2002 11:24:20 AM EST
[Last Edit: 9/2/2002 11:25:54 AM EST by imposter]
All of my ARs have 7 - 7.5 pound stock triggers. From what I understand, the only way to reliably make stock triggers lighter is the "Armorers Method" - basically switching hammers until you find a hammer/trigger combination that works better. I tried this with one AR that had a 12 pound trigger, and did manage to get it down to 7. Can I expect to get a 6 or 5 pound trigger with this method, or is 7 pounds about as good as you can expect from a stock trigger?
Link Posted: 9/2/2002 1:06:29 PM EST
The MD AR15 Shooter's site has instructions on lightning the stock trigger.
Link Posted: 9/2/2002 1:31:32 PM EST
Link Posted: 9/4/2002 6:50:51 AM EST
get a light spring kit for $15, i cant remember the brand(got it at a gunshow) it reduced my pull from 8lb to 3.5lb...very nice. Springs is all you need.

Gaspain
Link Posted: 9/5/2002 1:04:30 PM EST
JP Trigger spring kit. $10. And some moly slide lube. Took mine down to 4.5 lbs.

Link Posted: 9/6/2002 3:18:15 AM EST
wow! 3.5 - 4.5 lbs with just a spring kit. Are these measured pull wieghts? What is the break like? Any reliability/doubling problems?

Top Top