Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 5/4/2004 4:29:09 PM EDT
[Last Edit: 5/4/2004 4:29:24 PM EDT by M11293]
I have a DPMS lower and am going to complete it with an upper, should I get a Bushy or stick with a DPMS upper?

I was thinking Bushy M4 or DPMS M4.

What do you think.
Link Posted: 5/4/2004 4:43:11 PM EDT
Either upper will fit...Stan
Link Posted: 5/4/2004 5:05:48 PM EDT
So if I get the Bushy I won't have to adjust anything to make it fit, and how do you make a tighter fit on a rifle.
Link Posted: 5/4/2004 5:36:18 PM EDT
Accuwedge (spelling?) will take care of any play between the receivers. However, I wouldn't be concerned with looseness. I'm thinking tightness, which isn't really a bad thing, will most likely present itself.

I would go for it. I'm a Bushy fan :)

- BUCC_Guy
Link Posted: 5/4/2004 5:39:49 PM EDT

Originally Posted By M11293:
So if I get the Bushy I won't have to adjust anything to make it fit, and how do you make a tighter fit on a rifle.



If you get lucky and have a minor tolerance variation between mfg as to rear take-down pin hole, you can use that to your benefit. I have an Oly lower were the rear pin hole seems to be a few "thou" off to all my other 3 working uppers, so a little downward pressure on the upper will allow the pin to pass, thus no wiggle between upper-lower,nice and solid.
Link Posted: 5/4/2004 5:44:27 PM EDT
Might as well go bushy for the 16" since I have my 24" DPMS accuracy upper. Bushmasters are know for their dependability.
Link Posted: 5/5/2004 4:21:08 AM EDT
Should I get the bolt carrier with the Bushy upper or would a DPMS Chrome Coated carrier work in the Bushy receiver?
Link Posted: 5/5/2004 6:20:22 AM EDT

Originally Posted By M11293:
Should I get the bolt carrier with the Bushy upper or would a DPMS Chrome Coated carrier work in the Bushy receiver?



The DPMS chromed carrier will work but it's not really necessary. Go ahead and get a Bushmaster bolt/carrier when you order the upper. Just order a complete upper from Bushmaster and you'll be ready to roll.
Link Posted: 5/5/2004 12:40:47 PM EDT
[Last Edit: 5/5/2004 3:07:19 PM EDT by M11293]
So any bolt will work in any upper? I heard something about head-spacing?

Link Posted: 5/5/2004 3:07:30 PM EDT
Should I consider getting an accuwedge from Fulton-Armory?
Link Posted: 5/5/2004 3:38:45 PM EDT
Well, if the upper is new and the bolt is new you will be okay. If you order a Bushmaster upper complete with bolt & carrier then it will be headspaced at the factory and you have nothing to worry about.

Yeah man, you can use an accuwedge, I run them in some of my ARs and they help eliminate the little widge between the upper and the lower.
Top Top