Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 9/4/2005 4:33:05 PM EDT
Title says it all....Im at work and don't have my CAR-15 to measure. Interested in purchasing a pelican or similar heavy-duty thick plastic case that will hold my CAR-15 when disassembled....like the case will hold upper and lower and a couple mags....

Thanks!
Link Posted: 9/4/2005 5:10:36 PM EDT
My LMT 16" M4 upper is 24.75" from the front of the A2 FS to the rear face of the CH.

Check also with other members reply to verify the length is correct and that they mostly agree.

Good luck.
Link Posted: 9/4/2005 5:17:41 PM EDT
Cool. Thanks.
Link Posted: 9/4/2005 7:55:36 PM EDT
IIRC, a 16" carbine is about 31" or 32" overall with a 6position stock and an A2 FH.

Don't know if this would help any.

WIZZO
Link Posted: 9/5/2005 3:44:09 AM EDT
Yup. 24.75 in. from A1 FS to rear of charging handle.

32.5 in. with 6 Pos. stock collapsed.

Hope this helps.
Link Posted: 9/5/2005 11:12:16 AM EDT
Thanks for the responses..
Top Top