Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 7/19/2003 3:18:48 PM EST
I'm a new AR-15 owner, I have a nightforce NXS 3.5-15+50 that I want to mount on a flat-top receiver, what would be the best type and brand of scope rings for this application. I was thinking of a one piece ring and base unit. This scope requires a 30mm ring, thanks for all suggestions
Link Posted: 7/19/2003 5:06:31 PM EST
Armalite sells a one piece scope mount. It's great for what you have in mind. Steve.
Link Posted: 7/19/2003 5:20:38 PM EST
Steve, thanks I'll check out Armalite, Gerry
Link Posted: 7/19/2003 5:42:37 PM EST
ARMS #35 [img]http://photos.ar15.com/ImageGallery/Attachments/DownloadAttach.asp?iImageUnq=8954[/img]
Link Posted: 7/19/2003 6:20:03 PM EST
KevinB, thanks for picture, great looking rifle, I.ll check out Arms web site, appreciate your time, Gerry
Link Posted: 7/19/2003 7:15:26 PM EST
Gerry, No prob, anything for a fellow Canuck.
Link Posted: 7/20/2003 6:03:59 AM EST
Well, you really should consider the ARMS #22, in whatever height you need, as well as the Armalite. The #22 are 30mm, but you can get inserts to drop it down to 1" should you ever need to. ARMS guarantees these to return to zero when removed and re-attached...don't know about the Armalite. Also, the Armalite mount is much bulkier, and probably heavier, if that's a consideration. The Armalite's a great mount, though, I don't know anyone who has one that doesn't like it.
Link Posted: 7/20/2003 9:05:01 AM EST
Fenian, I'll take a look at what Arms Has to offer Thanks for info, Gerry
Link Posted: 7/20/2003 9:33:30 AM EST
I have an ArmaLite mount for my M15A4 and have been very pleased with it. I usually don't take my scopes off, but I've done it once or twice with the ArmaLite mount and it has been fine.
Link Posted: 7/20/2003 9:38:35 AM EST
The ARMS#22 are nice but... I like the #35 better for two reasons. 1) It allows me more room to more the scope forward than the #22's - eye relief is a real bitch on AR's (unless you have a ARMS sleeve) 2) The #35 is a one piece item which IMHO is a more robust system than the #22. Not sayign I dont like the #22's (I do) I just find the #35 better for AR's
Link Posted: 7/20/2003 9:43:57 AM EST
Engineer, Good information, thanks for your input, I think the general opinion seems to favour Arms and Armalite,I'll probably go with one of their products. Thanks to all who offered assistance. Gerry
Link Posted: 7/20/2003 9:53:09 AM EST
KevanB. Does the Arms #35 come with different height rings?,It is a one piece mount with base and rings attached is this correct? I am a little confused, when I looked at their Web site, it looked like the mount and rings where separate items, maybe you could enlighten me, I'm suffering a brain freeze, thanks for clarification. Gerry
Link Posted: 7/20/2003 10:59:52 AM EST
Gerry, The ARMS has different height spacers. The ring and mount are the same. I am using the #35M (I think the #35H would have been better but...)
Link Posted: 7/20/2003 11:11:45 AM EST
KevanB Thanks for clarification, I think Arms #35H might be best way to go. Gerry
Top Top