Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Arrow Left Previous Page
Page / 3
Posted: 8/23/2004 4:05:06 PM EST
We all have some sort of piece or part that we wish they made for the AR series of rifles that they don't. Mine is a set of high QR 1" rings that aren't just 30mm with a 1" insert.

I'd also like to see a way to make the Cavarms take a single point sling that wasn't a wrap around strap.
Link Posted: 8/23/2004 4:07:29 PM EST
A tree that produces them.
Link Posted: 8/23/2004 4:10:11 PM EST
cupholders?
Link Posted: 8/23/2004 4:13:20 PM EST

A Zeiss/Swarovski/Leupold quality short eye relief scope designed from the ground up for the A2 carry handle...

Link Posted: 8/23/2004 4:15:09 PM EST
[Last Edit: 8/23/2004 4:16:03 PM EST by Halfcocked]
$50.00 Gen III night vision optics.
Link Posted: 8/23/2004 4:15:36 PM EST
USGI mags that are steel.
Link Posted: 8/23/2004 4:45:00 PM EST

Origionaly posted by Triburst1:
A tree that produces them.




+ a billion!
Link Posted: 8/23/2004 4:46:05 PM EST

Originally Posted By Halfcocked:
$50.00 Gen III night vision optics.




LMAO


I was expecting Lumpy as the poster for that...


$25 Trijicon to go in front of that would be even better.
Link Posted: 8/23/2004 4:46:21 PM EST
A supportive rich wife to go along with them...
Link Posted: 8/23/2004 4:50:52 PM EST
15"chrome lined carbine barrels so a birdcage can be permanently attached to maintain the proper look.
Link Posted: 8/23/2004 4:51:07 PM EST
Title one DIAS.
Link Posted: 8/23/2004 4:51:27 PM EST

Originally Posted By DM1975:
A supportive hot rich wife to go along with them...


Link Posted: 8/23/2004 4:51:50 PM EST
Link Posted: 8/23/2004 4:58:22 PM EST

Originally Posted By Aimless:
new production 20" pencil barrels in 1/9 or 1/7



that reminds me
18" lightweight midlength in either 1:9 or 1:7. Hell, let's compromise, let's call it 1:8 so we can have the 1:8 18".
Link Posted: 8/23/2004 5:33:57 PM EST
7 inch beowolf barrel, for my no ban build
Link Posted: 8/23/2004 5:59:42 PM EST
Ninja star mounting device.
Link Posted: 8/23/2004 6:08:50 PM EST

Originally Posted By norman74:
let's call it 1:8 so we can have the 1:8 18".



You can...
18" 1:8 twist middy
Link Posted: 8/23/2004 6:23:42 PM EST
[Last Edit: 8/23/2004 6:24:37 PM EST by IPSC_GUY]
An ACOG. TA-31 to be exact, that zooms from 0 to 4 X. That would make life complete... Yep Yep Yep


IPSC_GUY
Link Posted: 8/23/2004 7:04:13 PM EST
a kitchen sink...
Link Posted: 8/23/2004 7:17:42 PM EST
Title II recievers made after 1986, that us unwashed "civilians" can own.
Link Posted: 8/23/2004 7:32:07 PM EST
some sort of device that automatically zero's your rifle perfectly for you :-)

Love shooting, hate zeroing.
Link Posted: 8/23/2004 7:36:03 PM EST

Originally Posted By Marksman14:
some sort of device that automatically zero's your rifle perfectly for you :-)

Love shooting, hate zeroing.



... Zeroing is fine, I hate break-in periods
Link Posted: 8/23/2004 7:37:20 PM EST

Originally Posted By IPSC_GUY:
An ACOG. TA-31 to be exact, that zooms from 1 to 4 X. That would make life complete... Yep Yep Yep


IPSC_GUY



Fixed it for ya'. LOL You have to have at least "1" power, that's normal eye sight. I'd like to see a dot sight that has variable power. 1-6x would be nice. Also, I'd like the dot to adjust too so it'd stay a constant size thru the power levels. In other words if you have a 4moa dot(4" at 100 yrds.) and you're at 1x you'd cover 4", at 4x the dot would still only cover 4" at a 100 yrds.
Link Posted: 8/23/2004 7:38:02 PM EST
[Last Edit: 8/23/2004 7:38:26 PM EST by TNFrank]
*
Link Posted: 8/23/2004 7:47:43 PM EST
A factory production upper with both a fixed A2 rear sight, and instead of a carry handle, a flat top rail from the front of the sight forward.

May this is some good allergy medication! I may give up beer for this stuff!
Link Posted: 8/23/2004 7:53:55 PM EST

Originally Posted By kuhlewulf:
A factory production upper with both a fixed A2 rear sight, and instead of a carry handle, a flat top rail from the front of the sight forward.

May this is some good allergy medication! I may give up beer for this stuff!



I thought RRA was making something like that?
Link Posted: 8/23/2004 7:56:31 PM EST
TNFrank,
Wow, hadn't seen those. But I had been thinking more along the lines of a standard height rail. I saw one similar to what I'm talking about once, but it was a frankenstein custom job.
Link Posted: 8/23/2004 7:56:41 PM EST
A production lower that accepts unmodified Grease Gun mags and works with the Olympic .45ACP uppers...
Link Posted: 8/23/2004 7:58:46 PM EST
A group of people with the time, talent and inclination to archive high-res images of the various components out there. Then take them and render them in 3D a la Maya or other image program.

Then build a website anyone could visit that would allow you to mix-n-match components and view the results. It would also have ballistics and ordering information right there. So if you built a rifle and really, really loved it you could click "Buy Now" and your contributing advertisers would get their respective orders via an escrow service or individually, depending on your relationship with them.

I figured if I was going to dream it I might as well find a way to pay for it, too.
Link Posted: 8/23/2004 8:02:15 PM EST

Originally Posted By HardShell:
A production lower that accepts unmodified Grease Gun mags and works with the Olympic .45ACP uppers...



As long as we're dreaming make it use standard Thompson mags(that way it'll interchange with my 27a1) and we'd be in buisness.
Link Posted: 8/23/2004 8:10:11 PM EST
crome lined 1/8 barrels in all sizes and contours
Remman
Link Posted: 8/23/2004 8:22:35 PM EST
early 80s prices on all new manufactured pieces and a magical mag that nevers fires empty.
Link Posted: 8/23/2004 8:31:36 PM EST

Originally Posted By Darkest2000:
USGI mags that are steel.



sa80 mags are as good as they get.
Link Posted: 8/23/2004 8:36:17 PM EST

Originally Posted By Remman:
crome lined 1/8 barrels in all sizes and contours
Remman



AMEN!
Link Posted: 8/23/2004 10:32:08 PM EST

Originally Posted By Unknown1Sailor:
Title II recievers made after 1986, that us unwashed "civilians" can own.


+1
Link Posted: 8/23/2004 10:44:40 PM EST
[Last Edit: 8/23/2004 10:45:26 PM EST by Alien]

Originally Posted By kuhlewulf:
TNFrank,
Wow, hadn't seen those. But I had been thinking more along the lines of a standard height rail. I saw one similar to what I'm talking about once, but it was a frankenstein custom job.



Get an Lewish Machine & Tool rear sight. It looks like a great sight, but at the moment, I'm using an ARMS #40. I am sure there are some for sale by dealers in the equipment exchange, but here you go:

www.lewismachine.biz/
Link Posted: 8/23/2004 10:55:50 PM EST

Originally Posted By javven:
A group of people with the time, talent and inclination to archive high-res images of the various components out there. Then take them and render them in 3D a la Maya or other image program.

Then build a website anyone could visit that would allow you to mix-n-match components and view the results. It would also have ballistics and ordering information right there. So if you built a rifle and really, really loved it you could click "Buy Now" and your contributing advertisers would get their respective orders via an escrow service or individually, depending on your relationship with them.

I figured if I was going to dream it I might as well find a way to pay for it, too.



+1 I can do 3d models if anyone can program..
Link Posted: 8/23/2004 10:58:29 PM EST
[Last Edit: 8/23/2004 11:06:21 PM EST by FishKepr]

Originally Posted By javven:
A group of people with the time, talent and inclination to archive high-res images of the various components out there. Then take them and render them in 3D a la Maya or other image program.

Then build a website anyone could visit that would allow you to mix-n-match components and view the results. It would also have ballistics and ordering information right there. So if you built a rifle and really, really loved it you could click "Buy Now" and your contributing advertisers would get their respective orders via an escrow service or individually, depending on your relationship with them.

I figured if I was going to dream it I might as well find a way to pay for it, too.



I think ADCO's "Build Your M4 Upper!" web page is about as close as we can get right now. Check it out if you haven't seen it yet. Very cool.

Personally, I'd like to see a low cost ACOG too. Civies like quality optics too, but we don't need something that can take being run over by a Humvee. Well, most of us anyway...
Link Posted: 8/24/2004 12:46:17 AM EST

Originally Posted By brewsky101:

Originally Posted By norman74:
let's call it 1:8 so we can have the 1:8 18".



You can...
18" 1:8 twist middy



Link just takes me to the EE, am I missing something?
Link Posted: 8/24/2004 1:17:07 AM EST

Originally Posted By ArmorerKrug:
7 inch beowolf barrel, for my no ban build



You'll shoot your eye out!
Link Posted: 8/24/2004 3:52:39 AM EST
A bullpup lefty version like the Aug, but at the same price as an AR.
Link Posted: 8/24/2004 6:45:26 AM EST
a 1913 rail mounted bottle opener.
Link Posted: 8/24/2004 7:21:29 AM EST
A SAW-ish styled carry handle that would attach to a rail. Folding of course!

Arc
Link Posted: 8/24/2004 7:31:10 AM EST
Link Posted: 8/24/2004 7:38:36 AM EST

Originally Posted By BookHound:
I'd like to see an Aimpoint with the EOTech reticle. I actually spoke to Aimpoint about it and they have no plans to do this. Too bad. It would have killed all the crazy Aimpoint vs. EOTech threads, IMHO.



Better yet, multiple selectable reticles.



Lonny
Link Posted: 8/24/2004 7:55:29 AM EST
They get so expensive you should be able to get a set of wheels for them to ride them to work????

MT
Link Posted: 8/24/2004 8:46:08 AM EST
A phaser-rifle upper. That would be cool!
Link Posted: 8/24/2004 8:59:43 AM EST
A one piece scope mount that places the scope 1/4 " lower and 1" farther forward than Armalites one piece mount.
Link Posted: 8/24/2004 9:08:23 AM EST
Uhhh.... Shirke
Link Posted: 8/24/2004 9:22:05 AM EST
[Last Edit: 8/24/2004 9:22:48 AM EST by TriggerFish]

Originally Posted By Q3131A:
Uhhh.... Shirke


Link Posted: 8/24/2004 9:27:35 AM EST
Pencil Dissipator barrel
Arrow Left Previous Page
Page / 3
Top Top