Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/16/2005 9:08:00 PM EST
[Last Edit: 12/16/2005 9:08:47 PM EST by Special_FX_45]
...
Link Posted: 12/17/2005 3:13:37 AM EST
BREAKFREE CLP!!!
Link Posted: 12/17/2005 4:51:03 PM EST
Gunscrubber to clean out all the heavy crap, then final cleanng/lube with breakfree clp
Link Posted: 12/17/2005 4:53:41 PM EST
Shooters Choice... For the bore. CLP for all else.
Link Posted: 12/17/2005 6:52:27 PM EST
Royco CLP
Link Posted: 12/17/2005 7:08:27 PM EST
Hoppes and/or CLP.

They don't make any others, do they?
Link Posted: 12/17/2005 8:40:41 PM EST
Otis + Break-Free CLP
Link Posted: 12/17/2005 8:42:18 PM EST
Slip 2000 and Mil-Comm.
Link Posted: 12/19/2005 7:10:15 AM EST
Eezox, FP-10, Corrosion X Aviation.

Mil-Comm: TW25B for grease, MC-25 for cleaner
Link Posted: 12/19/2005 10:08:52 AM EST
[Last Edit: 12/19/2005 10:09:39 AM EST by PythonGuy]
Gunscrubber to clean out all the burnt carbon and powder residue, then Eezox to clean and lube the rest. For any special cleaning I'll use some Hoppes elite, which is MPro-7 cleaner, then the Eezox to re-coat the metal as the cleaner will remove ALL oil leaving the metal vulnerable to rust.
Link Posted: 12/19/2005 4:39:03 PM EST
2/3 Shooters choice mixed with 1/3 Kroil Penetrating Oil for cleaning.

MD Labs XF-7 for lube and protectant.

In the field where you can only have one.....CLP!

Tack
Link Posted: 12/30/2005 7:36:23 PM EST
BreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPCLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLPBreakFree CLP

Link Posted: 12/30/2005 8:27:19 PM EST
[Last Edit: 12/30/2005 8:29:15 PM EST by Blankwaffe98]
My all time favorites are Mil-comm Products,MPC's FP-10 CLP,Ballistol and Break Free CLP.I also Like the Break Free LP.
What I use currently is the Mil-comm(pistols)and FP-10 CLP(rifles).
Ballistol as a CLP for the Black Powder guns and the mil-surps that see corrosive ammo.
Solvents...I like Hoppe's #9 for normal cleaning,Sweets7.62 or BoreTech Benchrest Blend for the copper.
Link Posted: 12/30/2005 8:32:45 PM EST
Outer's Oil. Hoppes solvent is good, too.
Link Posted: 12/31/2005 12:54:32 AM EST
Wipeout + CLP + Kroil Oil pretty much covers everything
Link Posted: 12/31/2005 1:04:43 AM EST
Butches Bore Shine

It gets both carbon and copper fouling.
Link Posted: 12/31/2005 4:36:42 AM EST
Ballistol for C, L, and P. Only 500 rounds through my ArmaLite M15A2, but so far so good. Seems to do it all well, no problems, cleans up fast, biodegradeable and non - toxic. My front door is 120 yards from high tide on the Atlantic side, so salt corrosion is a constant concern. After 16 months, not a trace of rust. Carbon, copper, and lead removal quick and easy so far. I'm very happy with it. More here: www.amoratech.com
Link Posted: 12/31/2005 4:40:59 AM EST
Link Posted: 12/31/2005 8:33:16 AM EST
Breakfree CLP!!!
Link Posted: 12/31/2005 11:26:46 AM EST
You have to clean an ar?
Link Posted: 12/31/2005 6:17:00 PM EST
Hoppe's # 9, Auto-Zone break cleaner, BreakFree CLP. I've come to conclusion these are all I need.
Link Posted: 12/31/2005 6:23:21 PM EST
Mpro-7 (bought by Hoppes and now sold as Hoppes Elite?) for cleaning. Works very well, non-toxic, and almost no smell. You have to stick your nose in the bottle to smell it, and it just smells like soap almost.

Still deciding/looking for the ultimate lube. [:\]
Link Posted: 12/31/2005 6:44:56 PM EST
Mil-Comm.

Just wish they could replicate the aroma of Hoppes to complete the experience.

Seriously.

Copper fouling needs to be addressed however.

JB bore compound and Sweets gets the nod at certain intervals for the Bore.

Otherwise.

It's all Mil-Comm or MPro-7 in the Chrome bores.

Yes I own a bore scope.

S-28
Link Posted: 12/31/2005 8:26:17 PM EST

Originally Posted By GlaucomicDeafBugler:
Ballistol for C, L, and P. Only 500 rounds through my ArmaLite M15A2, but so far so good. Seems to do it all well, no problems, cleans up fast, biodegradeable and non - toxic. My front door is 120 yards from high tide on the Atlantic side, so salt corrosion is a constant concern. After 16 months, not a trace of rust. Carbon, copper, and lead removal quick and easy so far. I'm very happy with it. More here: www.amoratech.com



Been using Ballistol for about 3 years now. Got rid of all the other cleaner and lubes I had used. Nuff said.
Link Posted: 12/31/2005 8:30:12 PM EST
I'm the lone wolf.

<­BR>
Tetra
Link Posted: 12/31/2005 8:43:17 PM EST

Originally Posted By GiggleSmith:
Butches Bore Shine

It gets both carbon and copper fouling.



+1
Link Posted: 1/1/2006 12:01:24 AM EST

Originally Posted By Backstop:
Hoppes and/or CLP.

They don't make any others, do they?



+ 1

It's all I've known since I was a kid, so is there anything else?
Link Posted: 1/1/2006 7:13:16 PM EST
Otis gear and standard military cleaning brush
MPro-7 for general cleaning
FP-10 for lube
Gun Blaster for cleaning trigger assemblies
Tetra Gun Spray for lubricating trigger assemblies and for lubricating inside of barrel
Link Posted: 1/3/2006 7:39:06 PM EST
Otis tools and EEZOX
Link Posted: 1/6/2006 6:44:48 PM EST
KleenBore!!!!! Used Hoppes since I was 8 or so, but since I discovered KleenBore I won't use anything else, great kits, awesome CLP, and they even make a 40mm kit for my Mortar! KleenBore is some good stuff!
Link Posted: 1/7/2006 2:49:08 PM EST
A cleaning kit for your 40mm Mortar? Post a pic, OK?
Link Posted: 1/7/2006 5:14:26 PM EST
Butches for the bore, CLP for the bolt, etc....

Link Posted: 1/7/2006 5:23:04 PM EST
MPRO-7 by the gallon from Brownells. It cuts carbon, cleans the bore, and doesn't stink up the house. CLP for lube on the AR platform, most semi handguns get Thermalene Magnalube G teflon based grease. CLP anywhere this is too heavy.
Top Top