Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 7/29/2003 12:13:44 PM EST
A friend and I both bought DCM Bushmaster rifles with the two stage match triggers. While we don't have a lot of rounds through them the triggers have not gave us any problems.

Another guy we sometimes shoot with has one in his rifle with about 4,000 rounds through it and so far it has not had any problem. It still has the same great zero creep light second stage without any adjustment since it was installed.

I see a lot of posts on the net claiming these triggers are junk and I would like to know why this is.

Are some of the parts soft? Can they be hardened?

I know a machinist that is an expert in this field if it is required.

If this needs to be done I would like to do it now and not have it screw up in a highpower match.
Link Posted: 7/29/2003 2:28:50 PM EST
My Bushmaster Varminter has performed flawlessly for the time I've had it. (since they first released the model) Its not as nice as, say, the Jewell trigger in one of my other ARs but it is nice none the less...
Link Posted: 7/29/2003 3:06:33 PM EST
I have a Bushmaster Varmint Special with the 2 stage trigger in it. I have put about 300 hundred rounds through it with out any problems.
Link Posted: 7/29/2003 5:15:05 PM EST
It's really not that bad of a match trigger as long as you keep it well lubed, when it gets dry the first stage gets gritty and inconsistant but the trigger still breaks clean. I have a Jewell and an Armalite match triggers also and the BM is just as good as long as you lube it. Tan.
Top Top