Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 10/6/2004 12:13:09 AM EST
[Last Edit: 10/9/2004 10:38:29 PM EST by ehilerio]
What Upper can i use for a 9mm MAC10 Supp. and the lower is sbr
ok tk
Link Posted: 10/6/2004 7:56:07 AM EST
Use it with any upper, provided the barrel or adapter is cut to allow 3/4-10 thread for the MAC can to screw on... My barrel is 8.5" and profiled to look like the front of Uzi, so I use my Uzi can.

Mike at TSC can make the barrel to look like the front of your MAC in whatever length you desire. He has an album out there with pics of his products.

Totalsharpc@aol.com
Link Posted: 10/9/2004 10:37:48 PM EST
[Last Edit: 10/9/2004 10:39:13 PM EST by ehilerio]
hey do you have any photos of the setup that you have

Any1 know if the coastal Supp fit in side any hanguard with a 5.5 barrel I want the ar to luke like a AR15SD ok tk
Link Posted: 10/10/2004 4:17:20 AM EST
Most current 9mm cans are under 2" OD, except for the AWC Mk9. So they will fit inside the free float tubes' 2"ID.

Mike can do a MAC barrel for you, not sure if joeblack is doing barrels from blank (needing chambering), but he does a lot of work to existing barrels, he has a real talent with CNC machine work.

I had to have a larger tube made so my AWC would fit inside.






Here is a pic of a MG that has a sleeve on it to use a Uzi can: (borrowed from Dano 0314/work done by joeblack)
Link Posted: 10/10/2004 4:47:34 AM EST
ehilerio,
Here are a couple of pics of my Uzi suppressor on my M16. Instead of fitting the suppressor in the handguard, I made it fit closely against it. The handguard and the suppressor has an outside diameter of two inches. I use a Nomex cover to hold onto it while shooting. For more info and pics, click HERE

Dan



Top Top