Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 9/15/2002 6:34:19 AM EST
I just purchased a Victor Arms/CZ 22 Upper at a gun show. Can anyone give me information on operation, maintenance, field stripping, and general advice?


Jules Lewis
Link Posted: 9/15/2002 7:27:54 AM EST
Ahh the Victor Arms upper... what can I say. Actually the unit itself is nice I have one and like it a lot. However I only currently have one mag. I had more mags ordered and got ripped off by them for 2 ciener mags(which they basically stole). Ceiner mags, may or may not work in yours YMMV. I personally at one time got them to work (3Os) The unit itself comes down as follows and I don't have mine in front of me right now. Take the upper off (or break the gun open). Push the retaining pin out. Remove the side cocking handle. Bolt carrier will come out the back.
Any questions email me and I'll get mine to clear up the instructions. The only issue I have with mine is that the unit will not always lock the hammer back on either of my ARs. It feed and extracts fine, even real dirty, but it seems to not always have enough Ummpth to fully engage the sear and lock the trigger down to be released for the next shot. Ammo issue? I dont know. Also for whatever reason this upper seems queter than a 10/22 with the same ammo, neither is suppressed.

any questions let me know

Link Posted: 9/15/2002 9:51:24 AM EST
Thanks for the information. Does the retaining pin just push out, or is it locked in in some way. Also, how does the cocking come off?

Jules Lewis
Link Posted: 9/15/2002 10:12:25 AM EST
Disregard last questions. Retaining pin dropped out with a light tap. Cocking handle slipped off after rods and recoil springs werer removed. The insides look similar to most semi-auto rimfires. I wonder if the Victor shares parts with any CZ semi-auto rimfire.

Jules Lewis
Link Posted: 10/5/2002 1:49:18 PM EST
Have the V22 Upper as well, but with no magazine. Do have the V22 Operations and Maintenance Manual. Can provide copy in Microsoft Word (.DOC) format if desired.

Would appreciate any info regarding obtaining a magazine.

Link Posted: 10/5/2002 3:48:47 PM EST
Can you elaborate on getting the Ceiner magazine working?
By (30s), do you mean 30 round?
What do you mean that you got it to work at one time?
Does that mean you got one to work regularly, or that you got it to work once and it did not work after that?
What did you do to the Ceiner magazine to make it work.
What is the difference between a 30-round magazine and the others that you got that one to work?
Did you try lesser size magazines?
Link Posted: 10/6/2002 8:51:32 AM EST
What I mean is that the cieners worked on my upper, then I sent them in to Victor arms for them to look at as they had been verifiing that they would work right with and they stole then when they collasped. If I were you I would buy I ciener 10rd $25-27 from brownells IIRC and try it out. I know that according to Victor arms personel that some of them would work fine with cieners and some required a light modification to either the bolt or mag. Yes I was stupid. As to the trring smaller mags, I have a 10 victor, that is the only one I have tried.

Top Top