User Panel
User Panel
User Panel
|
Posted: 6/6/2009 9:47:17 AM EDT
[#1]
Your 6920 is not "Blued."
It is Parkerized. Nothing to worry about. ETA: Blueing is a very shiny, polished black finish used on old revolvers and hunting rifles. |
|
|
|
Posted: 6/6/2009 9:49:34 AM EDT
[#2]
So is it normal to apply oil to all exterior metals?
|
|
|
|
Posted: 6/6/2009 9:51:38 AM EDT
[#3]
Quoted:
So is it normal to apply oil to all exterior metals? Depends on how you intend to store the weapon and what your local conditions are like. Since it appears you live in the deep south, I am guessing it is humid there year round, and you might want a very light coating of oil on the exterior surfaces to help prevent rust. In Arizona, not so much. |
|
|
|
Posted: 6/6/2009 10:14:51 AM EDT
[#4]
Quoted:
So is it normal to apply oil to all exterior metals? Just wipe it down with a CLP coated rag. A little goes along way on the external. We have 100% humidity most of the time, so its important to get it wiped down. |
|
|
|
Posted: 6/6/2009 10:16:46 AM EDT
[#5]
CLP will not hurt your rifle.
Simple Green will... 
|
|
|
|
Posted: 6/6/2009 10:21:41 AM EDT
[#6]
BF/CLP is the best for a M16/AR15
I have used KTX on my non park FSB 
0 problems here in SWFL My M4`s are right next to my window ! If you clean your AR well in and out it welll be just fine I hadnt clean the outside of M4 for over a year and have 0 rust I clean the outside of Barrel mostly and other metal parts I dont clean ALUM Unless I get dirt etc! |
|
|
|
Posted: 6/6/2009 10:25:41 AM EDT
[#7]
CLP the steel parts, but there is no need to CLP the other exterior parts. On the aluminum (like the rail) and plastic parts all it does is impart a sheen, and help collect dust.
|
|
|
|
Posted: 6/6/2009 10:40:34 AM EDT
[#8]
Thanks for the back up
|
|
|
|
Posted: 6/6/2009 10:44:27 AM EDT
[#9]
I was drinking coffee and slow on my posting. Had I seen yours, I could have just agreed with you.
|
|
|
|
Posted: 6/6/2009 10:51:01 AM EDT
[#10]
Quoted:
I was drinking coffee and slow on my posting. Had I seen yours, I could have just agreed with you. check MOE topic PLZ 
Coffe sounds nice BTW back in 2002 what happen to all your info? / cool pic`s |
|
|
|
Posted: 6/6/2009 11:18:42 AM EDT
[#11]
In over 10 years of AR shooting, I've never put a drop of CLP or anything else on the exterior of any of my ARs.
They get wet periodically, but the dry off with no issue. I'm not around salt water though. 
|
|
|
|
Posted: 6/6/2009 11:28:51 AM EDT
[#12]
Quoted:
In over 10 years of AR shooting, I've never put a drop of CLP or anything else on the exterior of any of my ARs.
They get wet periodically, but the dry off with no issue. I'm not around salt water though. Im close to brackish water Peace river and have a canal in the back yard wich is dried up 99% of the time
|
|
|
|
Posted: 6/6/2009 11:34:02 AM EDT
[#13]
So how do you guys clean dirt/dust off then?
|
|
|
|
Posted: 6/6/2009 11:47:14 AM EDT
[#14]
Quoted:
Your 6920 is not "Blued." It is Parkerized. Nothing to worry about. ETA: Blueing is a very shiny, polished black finish used on old revolvers and hunting rifles. Just to clarify for the OP's peace of mind, the steel components of his new pony (like the barrel and front sight base) are parkerized. The aluminum components (like the upper and lower receivers) are hard coat anodized per the TDP. Neither finish will be harmed by CLP  Posted Via AR15.Com Mobile |
|
|
|
Posted: 6/6/2009 11:51:39 AM EDT
[#15]
Quoted:
So how do you guys clean dirt/dust off then? IF YOU READ MY REPLY I SAY I CLEAN DIRT OF ETC!!! #7 reply I think I clean dirt off if its so much I would use a hose
I use BF/CLP Brake cleaner to spray out Barrel/chamber / carrier/ bolt Makes for a Faster clean Black RAG will help you lint/dust
Buy a manual it will help you out! |
|
|
|
Posted: 6/6/2009 12:29:19 PM EDT
[#16]
I like to use a paint brush to clean the exterior of my weapons. Dipped VERY lightly in CLP, the brush helps get into tight areas to remove dust and dirt, and applies a VERY light coating of CLP to the exterior of the weapon. I finish things up with a wipe down using an old black t-shirt.
|
|
|
|
Posted: 6/6/2009 12:39:00 PM EDT
[#17]
QUIB change AKA to Mr Clean
|
|
|
|
Posted: 6/6/2009 1:00:25 PM EDT
[#18]
Whoever wrote that is an idiot. CLP will not harm blueing, parkerizing, anodizing, or stainless. When it dries, CLP also leaves behind a film of protective additives which usually preserve my guns better than silicone.
|
|
|
|
Posted: 6/6/2009 1:03:38 PM EDT
[#19]
I use CLP on my blued firearms, revolvers and shotguns. Have never had any problems, and this is the first that I have ever read about a problem. Is this something that I should be avoiding? The MSDS indicates that all the oils in CLP Are synthetics.
|
|
|
|
Posted: 6/6/2009 1:06:08 PM EDT
[#20]
Quoted:
Whoever wrote that is an idiot. CLP will not harm blueing, parkerizing, anodizing, or stainless. When it dries, CLP also leaves behind a film of protective additives which usually preserve my guns better than silicone. WROTE WHAT??? |
|
|
|
Posted: 6/6/2009 1:21:04 PM EDT
[#21]
Quoted:
Quoted:
Whoever wrote that is an idiot. CLP will not harm blueing, parkerizing, anodizing, or stainless. When it dries, CLP also leaves behind a film of protective additives which usually preserve my guns better than silicone. WROTE WHAT??? "Silicone oil helps protect your gun from moisture and gives it a shiny clean appearance. You should never use petroleum or mineral based oils on the exterior of your gun as these can damage the "bluing" on your gun (that's what makes it look black). Bluing is a form of rust and the use of such oils remove the bluing and can result in normal rust forming if the oil dries up. Should you need to restore the bluing on your barrel or metalwork you can get bluing compounds to do this. " OP says he heard this somewhere. |
|
|
|
Posted: 6/6/2009 1:26:12 PM EDT
[#22]
I would love to see your "blued" Colt AR15.
|
|
|
|
Posted: 6/6/2009 2:39:21 PM EDT
[#23]
Quoted:
I would love to see your "blued" Colt AR15. I used cold blue for touch up works GREAT !! |
|
|
|
Posted: 6/6/2009 2:40:53 PM EDT
[#24]
Quoted:
Quoted:
Quoted:
Whoever wrote that is an idiot. CLP will not harm blueing, parkerizing, anodizing, or stainless. When it dries, CLP also leaves behind a film of protective additives which usually preserve my guns better than silicone. WROTE WHAT??? "Silicone oil helps protect your gun from moisture and gives it a shiny clean appearance. You should never use petroleum or mineral based oils on the exterior of your gun as these can damage the "bluing" on your gun (that's what makes it look black). Bluing is a form of rust and the use of such oils remove the bluing and can result in normal rust forming if the oil dries up. Should you need to restore the bluing on your barrel or metalwork you can get bluing compounds to do this. " OP says he heard this somewhere. Thats waz what I was thinking he was talking about But didnt know if someone wrote a article in a mag |
|
|
|
Posted: 6/6/2009 2:40:54 PM EDT
[#25]
DOUBLE TAP
|
|
|
|
Posted: 6/6/2009 6:16:19 PM EDT
[#26]
I live in South FL...A hot and humid climate...I've used Hoppes (petroleum based) on my blued exterior Winchester rifle since the late 1960's. No problem with my “blued” rifle here...
|
|
|
|
Posted: 6/6/2009 6:29:07 PM EDT
[#27]
I've used Hoppes, Breakfree CLP, and Slip 2000 on my blued Dan Wesson revolver, never had a problem.
I agree, whoever wrote that has no clue. |
|
|
|
Posted: 6/6/2009 6:37:58 PM EDT
[#28]
Quoted:
So I sprayed down my new Colt 6920 with CLP and wiped down the exterior with it. Then I read this: Silicone oil helps protect your gun from moisture and gives it a shiny clean appearance. You should never use petroleum or mineral based oils on the exterior of your gun as these can damage the "bluing" on your gun (that's what makes it look black). Bluing is a form of rust and the use of such oils remove the bluing and can result in normal rust forming if the oil dries up. Should you need to restore the bluing on your barrel or metalwork you can get bluing compounds to do this. /snip It almost seems like something you'd read on the back of a silicone wipe package. |
|
|
|
Posted: 6/6/2009 7:29:47 PM EDT
[#29]
Quoted:
I live in South FL...A hot and humid climate...I've used Hoppes (petroleum based) on my blued exterior Winchester rifle since the late 1960's. No problem with my “blued” rifle here... are you near Punta Gorda? |
|
|
|
Posted: 6/7/2009 4:06:03 AM EDT
[#30]
CLP is what we used in the Army and it is still what i prefer!
|
|
|
|
Posted: 6/7/2009 4:27:04 AM EDT
[#31]
Quoted:
CLP is what we used in the Army and it is still what i prefer!
|
|
|
|
Posted: 6/7/2009 5:23:35 AM EDT
[#32]
Quoted:
Quoted:
CLP is what we used in the Army and it is still what i prefer! QUIB do you order CLP online ? If so can you point me to a good dealer I cant find any BF CLP ONLY TIN CAN TYPE wich I dont like |
|
|
|
Posted: 6/7/2009 5:40:55 AM EDT
[#33]
I get my CLP from Brownells -order it online
|
|
|
|
Posted: 6/7/2009 5:44:10 AM EDT
[#34]
I locally purchase my BF-CLP and BF-LP.
This might help in locating BF.........http://www.break-free.com/?location=/global/dealer.asp |
|
|
|
Posted: 6/7/2009 5:50:48 AM EDT
[#35]
CLP is fine.
|
|
|
|
Posted: 6/7/2009 5:53:14 AM EDT
[#36]
Quoted:
I locally purchase my BF-CLP and BF-LP. This might help in locating BF.........http://www.break-free.com/?location=/global/dealer.asp wanted to help / buy from a AR15.com Dealer But thanks for your help |
|
|
|
Posted: 6/7/2009 5:53:16 AM EDT
[#37]
Quoted:
I locally purchase my BF-CLP and BF-LP. This might help in locating BF.........http://www.break-free.com/?location=/global/dealer.asp wanted to help / buy from a AR15.com Dealer But thanks for your help |
|
|
|
Posted: 6/7/2009 5:57:58 AM EDT
[#38]
Quoted:
wanted to help / buy from a AR15.com Dealer Try Brownells. They are a site supporter. |
|
|
|
Posted: 6/7/2009 6:33:29 AM EDT
[#39]
I use diluted simple green to clean the BCG's on my ARs. I rinse them and then coat them with clp when done. What problems can the Simple Green cause?
I don't use it on any other parts, just the BCG. |
|
|
|
Posted: 6/7/2009 6:34:36 AM EDT
[#40]
Quoted:
So how do you guys clean dirt/dust off then? Garden hose is what I use. 
That's rarely even needed though. |
|
|
|
Posted: 6/7/2009 6:36:03 AM EDT
[#41]
Quoted:
CLP is what we used in the Army and it is still what i prefer! CLP is great. But there's no need (in my opinion) to rub it all over the outside like armorall.
|
|
|
|
Posted: 6/7/2009 6:37:47 AM EDT
[#42]
Quoted:
Quoted:
So how do you guys clean dirt/dust off then? Garden hose is what I use.
That's rarely even needed though. +1 if its muddy I told him in my original reply That I clean only when the outside alum is dirty Really no need to CLP alum Unless you like to play with your weapon and take pics
|
|
|
|
Posted: 6/7/2009 6:37:48 AM EDT
[#43]
Quoted:
Quoted:
So how do you guys clean dirt/dust off then? Garden hose is what I use.
I might try this. Do you have a personal preference when it comes to hose nozzles? |
|
|
|
Posted: 6/7/2009 6:41:09 AM EDT
[#44]
Quoted:
Quoted:
CLP is what we used in the Army and it is still what i prefer! CLP is great. But there's no need (in my opinion) to rub it all over the outside like armorall. I know your talking about the alum rec up/low right I do clean lube metal /steel parts like FA, Barrel, castle etc! only when needed once a year for a weapon that just sits 90% of the time |
|
|
|
Posted: 6/7/2009 6:45:44 AM EDT
[#45]
Quoted:
Quoted:
Quoted:
So how do you guys clean dirt/dust off then? Garden hose is what I use.
I might try this. Do you have a personal preference when it comes to hose nozzles? I use my thumb myself I have a pressure thingy I use to clean my drive
If My M4 was caked with sand mud I see mothing wrong with WATER as long as you clean it afterwards I use to do this with the OLD copper wash 7.62x 39mm soak my barrel in the bath tub hot soapy water |
|
|
|
Posted: 6/7/2009 6:52:47 AM EDT
[#46]
Quoted:
Quoted:
CLP is what we used in the Army and it is still what i prefer! CLP is great. But there's no need (in my opinion) to rub it all over the outside like armorall. No one mentioned “rubbing it all over the outside”.
Every time I post this recommendation I get one or two guys who envision “painting” the entire exterior of the weapon dripping wet with CLP. That is why I always ensure I emphasize LIGHT coating, and wipe down. When I am through cleaning the exterior of my weapon there is no evidence of standing or dripping CLP. 
|
|
|
|
Posted: 6/7/2009 6:54:30 AM EDT
[#47]
Quoted:
Really no need to CLP alum Unless you like to play with your weapon and take pics
|
|
|
|
Posted: 6/7/2009 6:58:58 AM EDT
[#48]
I think 80% of guys here KNOW you clean your weapon pretty much by the BOOK
add you have good tips also What I DONT and Never will Is run my Carrier/Bolt Dripping Wet I never had a problem with doing as my manual states And I have fired alot of ammo in 1 session More than I will ever fire for protection |
|
|
|
Posted: 6/7/2009 7:02:19 AM EDT
[#49]
Quoted:
Quoted:
Really no need to CLP alum Unless you like to play with your weapon and take pics
Like I said in the above first reply to Topic unless its dirty / mud /dust etc! Then yes I do it There are guys who clean there AR and when the shine comes off they add more CLP This is what Im refering to In no way am I talking or even think of you QUIB Quib you left out unless its dirty when you quoted me
|
|
|
|
Posted: 6/7/2009 7:24:45 AM EDT
[#50]
Quoted:
I use diluted simple green to clean the BCG's on my ARs. I rinse them and then coat them with clp when done. What problems can the Simple Green cause? I don't use it on any other parts, just the BCG. Simple Green will turn the upper/lower and any aluminum part a shade of purple.
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
