Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 9/17/2003 7:45:35 PM EST
Link Posted: 9/18/2003 1:12:58 AM EST
Nice read [:D] Thanks
Link Posted: 9/18/2003 4:12:57 AM EST
I am thinking this might explain why the PRI Fatboy/pigtail gas tubes and one-piece gas rings don't always solve problems on shorty ARs. The gas tube increases cycle time allowing the pressure in the chamber to drop to a level where it isn't enough to overcome extractor lift. At the same time, the one-piece is giving a better seal and increasing rearward movement of the bolt. Of course I had this thought during an insomniac moment at 2am this morning and don't own a shorty - so take it with a grain of salt.
Link Posted: 9/18/2003 5:02:15 AM EST
[Last Edit: 9/18/2003 5:14:00 AM EST by Yojimbo]
I told you there was good stuff there didn't I![:D] BTW, if you change the 2003 to 2002 in the link you can see last years presentations...[8D] Actually if you go here ->[url]http://www.dtic.mil/ndia/[/url] you can see all the NDIA conference information that's online.
Link Posted: 9/18/2003 5:17:33 AM EST
So the heavier spring/D-ring thing would probably prevent this entirely... The question then becomes, Do you want to prevent it?
Top Top